<div dir="ltr">Hey all,<div><br></div><div>The Omni Door card-swipe system seems to be working at the moment. However, be aware there might be an issue that resurfaces.<br><div><br></div><div>I came upon the front door system and it was not working. This was strange because Marc was granting access to a gaggle of folks maybe an hour before. The laptop was off, the switch was off, and all the cords were a tangled mess. I re-built a new little shelf for the laptop/server, power strips, switch, etc that are in the southeast corner of the front room of the building. Everything is neatly organized, let's keep it that way!</div><div><br></div><div>The magnetic stripe card reader was giving me such guff! It really didn't want to work, and I tested every single component to try to figure it out. I swapped to a new USB hub with a power supply several times, but on my last try it miraculously went from non-working to working. I have no idea why.</div><div><br></div><div>I did, however, build a theory for the color code of the magnetic stripe card reader:</div><div><ul><li>Red LED - power is on, problem with connection</li><li>Yellow LED - power is on, no connection</li><li>Green LED - power is on, connected</li><ul><li>UNLESS the green LED turns off after just one swipe, in which case:</li></ul><li>No light from LED - no power, possibly low power, or something else is happening I can't explain.</li></ul><div>// Matt</div></div></div></div>