<div dir="ltr"><div>I will be there tues 7pm-ish<br></div><div><br></div><div>The lighting kit and cams (canon powershot elph 160) just arrived with the lighting plate cut for the archivist. Photo attached.</div><div>My mistake on getting the cart before the horse. I did not know diybookscanner was sending me this plate.</div><div>Maybe we will be able to just cut that plate down. Let's look at it.<br></div><div><br></div><div>I think the order of tasks needs to be something like.</div><div>1. Obtain bolts fitted to tripod mount to mount cameras<br></div><div>2. Mount cameras with a temporary spacer representing an adjustable plate</div><div>(plate needed for: 1. power attaches on bottom of cam . 2. Cam needs to be adjustable in fine increments)</div><div>3. using archivist plate as a temporary, find the optimum lighting distance<br></div><div>4. create new structure to hold lighting plate</div><div>5. design new lighting plate if necessary from DXF or SVG file provided<br></div><div><br></div><div>We need to create more distance between the lights and the glass platen. The hacker-space design was defective in that. It was suggested doing this by eye is best<br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Jan 22, 2018 at 12:19 PM, Jake <span dir="ltr"><<a href="mailto:jake@spaz.org" target="_blank">jake@spaz.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">i need to know the exact dimensions of what you need.<div><div class="h5"><br>
<br>
On Mon, 22 Jan 2018, jacques revera wrote:<br>
<br>
</div></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div class="h5">
I just requested the DXF. I asked for the SVG also. I will email as soon as<br>
I see the file. I will confirm Tuesday 7p if it comes in before then.<br>
<br>
Jake if you could bring in or drop off that circuited FR4 which sounds like<br>
it should work, tuesday may be possible.<br>
<br>
On Mon, Jan 22, 2018 at 11:46 AM, <<a href="mailto:hol@gaskill.com" target="_blank">hol@gaskill.com</a>> wrote:<br>
<br>
</div></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div class="h5">
i can swing by tomorrow 7pm to run machine if you'll have materials<br>
<br>
On 2018-01-22 11:08, jacques revera wrote:<br>
<br>
Thanks hol.<br>
<br>
Does the SUDO have a machine to cut FR4 from a file? To do that, should I<br>
ask for a DXF or SVG file or something else? This is outside of my ken. Can<br>
someone else decide that and email me so I can ask for the file - and cut<br>
this little piece this week? I can help.<br>
<br>
Lighting assembly parts and cameras supposed to arrive today.<br>
<br>
jacques<br>
<br>
<a href="mailto:hol@gaskill.com" target="_blank">hol@gaskill.com</a> wrote:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
i know printing a dxf as an .xps document works if you have CAD<br>
</blockquote>
<br>
<br>
<br>
On Mon, Jan 22, 2018 at 10:27 AM, <<a href="mailto:hol@gaskill.com" target="_blank">hol@gaskill.com</a>> wrote:<br>
<br>
</div></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div class="h5">
i know printing a dxf as an .xps document works if you have CAD<br>
<br>
On 2018-01-20 08:17, jacques revera wrote:<br>
<br>
Which format?<br>
<br>
"Jonathon will send us the design files for the sockets mounting plate<br>
soon as I tell him what format we need to cut it at the SUDO room: DXF or<br>
SVG or something else?"<br>
<br>
I don't know anything about the machinery available at SUDO room or these<br>
kind of file formats.<br>
<br>
On Fri, Jan 19, 2018 at 2:30 PM, robb <<a href="mailto:sf99er@gmail.com" target="_blank">sf99er@gmail.com</a>> wrote:<br>
<br>
</div></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div class="h5">
good for solar panels 2<br>
:)<br>
<br>
On Fri, Jan 19, 2018 at 2:28 PM, robb <<a href="mailto:sf99er@gmail.com" target="_blank">sf99er@gmail.com</a>> wrote:<br>
<br>
</div></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div class="h5">
i think they're on to something w/the double linear fresnel lenses<br></div></div>
<<a href="http://www.mdpi.com/1996-1073/10/12/2091/htm" rel="noreferrer" target="_blank">http://www.mdpi.com/1996-1073<wbr>/10/12/2091/htm</a>><div><div class="h5"><br>
looks like it can hit 2 dimensions uniformly<br>
<br>
On Fri, Jan 19, 2018 at 1:44 PM, <<a href="mailto:hol@gaskill.com" target="_blank">hol@gaskill.com</a>> wrote:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Just looked at the instructions - are we overthinking how to<br>
illuminate a piece of paper?  Could easily use an aluminum channel with<br>
white LED strip to do same task.  Happy to bring these materials next tues.<br>
<br>
On 2018-01-18 22:37, jacques revera wrote:<br>
<br>
probably less than a square foot or half of that. depends on how we<br>
remake the piece holding the light to raise it higher<br>
<br>
On Thu, Jan 18, 2018 at 10:23 PM, Jake <<a href="mailto:jake@spaz.org" target="_blank">jake@spaz.org</a>> wrote:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
i have plenty of FR4 that does have copper on it, we could still use<br>
it for<br>
this.  how much do we need?<br>
<br>
<br>
On Thu, 18 Jan 2018, Marc Juul wrote:<br>
<br>
Nice! I'm not sure we have any non-circuitboard FR4. If it's not too<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
big we<br>
could just order it from e.g. seeedfusion as a circuitboard design<br>
with no<br>
exposed copper pads.<br>
<br>
On Thu, Jan 18, 2018 at 1:54 PM, jacques revera <<br>
<a href="mailto:jacquesrevera@gmail.com" target="_blank">jacquesrevera@gmail.com</a>><br>
wrote:<br>
<br>
I just purchased two refurbished 20 megapixel Canon PowerShot ELPH<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
160 and<br>
the archivist lighting assembly which includes LED bulbs, sockets,<br>
lenses,<br>
wiring and power adapter.<br>
<br>
Jonathon will send us the design files for the sockets mounting<br>
plate soon<br>
as I tell him what format we need to cut it at the SUDO room: DXF<br>
or SVG or<br>
something else?<br>
<br>
~<br>
<br>
<a href="http://diybookscanner.org/archivist/index6ea9.html?page_id=267" rel="noreferrer" target="_blank">http://diybookscanner.org/arch<wbr>ivist/index6ea9.html?page_id=<wbr>267</a><br>
This is the page describing the plate. It would be convenient if<br>
the SUDO<br>
room has some FR4 but as long as the material is opaque, heat proof<br>
and can<br>
be painted black, should be no problem.<br>
<br>
This plate will sit at the top center of the scanner. The plate also<br>
serves to block light from entering from the top direction. Since,<br>
we need<br>
to attach something to raise the lights higher than the original<br>
hackerspace design, we should not cut this out yet. It does not<br>
need to be<br>
the same shape as the archivist plate as long as the socket<br>
mounting holes<br>
are the same.<br>
<br>
Jonathon wrote last week:<br>
."..you can move the lights further away from the platen. Because of<br>
various design constraints, Daniel put the lights closer to the<br>
platen than<br>
is ideal on that model. For later models (like Daniel's Archivist<br>
design),<br>
the lights were been moved further away to reduce glare and hot<br>
spots. You<br>
want to reproduce this in some way. So just build a simple frame<br>
you can<br>
set on top of the scanner to lift the lights. There is a<br>
mathematical way<br>
to find the minimum distance, but it might be easiest just to do it<br>
empirically, pulling the lights away and taking sample photos until<br>
you see<br>
that there is no reflected light source."<br>
<br>
You can see how this the lights are put together on the archivist<br>
about<br>
halfway down this page<br>
<a href="http://diybookscanner.org/archivist/index9bef.html?page_id=54" rel="noreferrer" target="_blank">http://diybookscanner.org/arch<wbr>ivist/index9bef.html?page_id=<wbr>54</a><br>
<br>
Jacques<br>
<br>
______________________________<wbr>_________________<br>
sudo-discuss mailing list<br>
<a href="mailto:sudo-discuss@lists.sudoroom.org" target="_blank">sudo-discuss@lists.sudoroom.or<wbr>g</a><br>
<a href="https://sudoroom.org/lists/listinfo/sudo-discuss" rel="noreferrer" target="_blank">https://sudoroom.org/lists/lis<wbr>tinfo/sudo-discuss</a><br>
<br>
<br>
<br>
</blockquote></blockquote></blockquote>
______________________________<wbr>_________________<br>
sudo-discuss mailing list<br>
<a href="mailto:sudo-discuss@lists.sudoroom.org" target="_blank">sudo-discuss@lists.sudoroom.or<wbr>g</a><br>
<a href="https://sudoroom.org/lists/listinfo/sudo-discuss" rel="noreferrer" target="_blank">https://sudoroom.org/lists/lis<wbr>tinfo/sudo-discuss</a><br>
<br>
<br>
______________________________<wbr>_________________<br>
sudo-discuss mailing list<br>
<a href="mailto:sudo-discuss@lists.sudoroom.org" target="_blank">sudo-discuss@lists.sudoroom.or<wbr>g</a><br>
<a href="https://sudoroom.org/lists/listinfo/sudo-discuss" rel="noreferrer" target="_blank">https://sudoroom.org/lists/lis<wbr>tinfo/sudo-discuss</a><br>
<br>
<br>
</blockquote></div></div></blockquote></blockquote><div><div class="h5">
______________________________<wbr>_________________<br>
sudo-discuss mailing list<br>
<a href="mailto:sudo-discuss@lists.sudoroom.org" target="_blank">sudo-discuss@lists.sudoroom.or<wbr>g</a><br>
<a href="https://sudoroom.org/lists/listinfo/sudo-discuss" rel="noreferrer" target="_blank">https://sudoroom.org/lists/lis<wbr>tinfo/sudo-discuss</a><br>
<br>
<br>
</div></div></blockquote></blockquote>
<br>
</blockquote>
</blockquote></div><br></div>