<div dir="ltr">Hurraaaay! Thanks Jake!<br><div><div class="gmail_extra"><br><div class="gmail_quote">On Fri, Feb 23, 2018 at 3:52 PM, Jake <span dir="ltr"><<a href="mailto:jake@spaz.org" target="_blank">jake@spaz.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">I uploaded the correct firmware to the machine (it was running firmware for a<br>
machine with different physical attributes) and now it seems to print fine.<br>
<br>
I didn't have the time to properly prepare the bed though, so there was some<br>
non-adhesion, but the giant spool of filament is hooked up and it's ready to<br>
go.<br>
<br>
cura-lulzbot slicer is installed on the computer there, and "sudoroom white<br>
ABS" filament is defined and should work. Pronterface (red icon) is the<br>
program to use to drive the printer and run the gcode generated by cura.<br>
<br>
don't do the SD card thing, it won't work and is terrible.<br>
<br>
<a href="https://sudoroom.org/wiki/TAZ" rel="noreferrer" target="_blank">https://sudoroom.org/wiki/TAZ</a><br>
<br>
-jake<br>
<br>
On Thu, 1 Feb 2018, Paul Orozco wrote:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
So I'm coming across something else that's weird. It's superextruding on<br>
the left side of a calibration cube... Thought I'd share with you. Any<br>
ideas?<br>
<br>
On Jan 29, 2018 00:51, "Jake" <<a href="mailto:jake@spaz.org" target="_blank">jake@spaz.org</a>> wrote:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
that's great that you got it working! which filament were you using? we<br>
have a<br>
large spool of white ABS but the spool came apart. if we fix the spool and<br>
dust it off, it's still good.<br>
<br>
the hard part of using big spools of filament is making sure that the<br>
printer<br>
has a straight path to pull from the spool, and the spool can rotate<br>
freely.<br>
i can help with this on Tuesday. we already have so much filament, i don't<br>
want to buy more yet.<br>
<br>
-Jake<br>
<br>
On Mon, 29 Jan 2018, Paul Orozco wrote:<br>
<br>
Jake,<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
I actually just got it working. I figured I’d just download the slicer<br>
and slice it on my computer and load it up to the SD card. I started a<br>
print but the filament snapped. I guessed that’d happen like it did with my<br>
other old filaments. It’s just something that happens. Want to go in on<br>
some filament or IDRK? How should we go about that? I mainly have 1.75 at<br>
my home.<br>
<br>
Paul Orozco<br>
<br>
Sent from Mail for Windows 10<br>
<br>
From: Paul Orozco<br>
Sent: Sunday, January 28, 2018 10:27 PM<br>
To: Jake<br>
Cc: <a href="mailto:sudo-discuss@lists.sudoroom.org" target="_blank">sudo-discuss@lists.sudoroom.or<wbr>g</a><br>
Subject: RE: [sudo-discuss] Sudo Room 3D Printer Questions<br>
<br>
Jake,<br>
<br>
Hello, thanks for the replay. I do have experience with stuff like that.<br>
I actually have experience with stuff like that. I have my own shitty<br>
printer that’s a Tevo Tarantula; that one runs on Marlin (I think I<br>
recently uploaded 1.1.4). I’m still upgrading it though mechanically. I<br>
usually use Cura 3.1.0 for my slicer and have the usual Tarantula slicer<br>
for that. I also previously had an Anet A8 but that one was breaking down<br>
so often I ended up getting the Tarantula and sold my old one to a friend.<br>
I’ve heard different things about it including that it’s still broken or<br>
it’s fixed. Use the computer with a direct link instead of using the SD<br>
card. I was just looking for some kind of clarification. What kind of<br>
software you guys use to slice and all that good stuff.<br>
<br>
Thanks again,<br>
Paul Orozco<br>
<br>
Sent from Mail for Windows 10<br>
<br>
From: Jake<br>
Sent: Sunday, January 28, 2018 10:02 PM<br>
To: Paul Orozco<br>
Cc: <a href="mailto:sudo-discuss@lists.sudoroom.org" target="_blank">sudo-discuss@lists.sudoroom.or<wbr>g</a><br>
Subject: Re: [sudo-discuss] Sudo Room 3D Printer Questions<br>
<br>
Hi Paul,<br>
<br>
i'm happy to report that the nozzle heater resistor was recently<br>
replaced, so<br>
as far as i know there is nothing wrong with the printer except that it<br>
hasn't<br>
been used in a long time, so there's probably a lot of dust on the<br>
filament and<br>
the print bed, and maybe the nozzle is clogged.<br>
<br>
do you have experience using a 3D printer like ours, which is a TAZ 3<br>
running<br>
Marlin firmware? I'm guessing it will take a little bit of fiddling to<br>
get the<br>
first prints to come out well.<br>
<br>
I'll be hosting Hardware Hacking Tuesday this week at 7PM and you're<br>
welcome to<br>
come then and try to use the 3D printer. I can help a little bit while<br>
you're<br>
working on it, and there may be others who can help as well.<br>
<br>
-jake<br>
<br>
On Sat, 27 Jan 2018, Paul Orozco wrote:<br>
<br>
Hello everyone,<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
I'm a little new and I'm just wondering what's the status of the 3D<br>
Printer<br>
over here. I've heard it's broken right now, so I'm wondering what it'll<br>
take to fix it and be able to use it.<br>
<br>
Paul Orozco<br>
Cell: (916)337-7101<br>
<br>
<br>
</blockquote>
<br>
<br>
</blockquote></blockquote>
</blockquote>
<br>______________________________<wbr>_________________<br>
sudo-discuss mailing list<br>
<a href="mailto:sudo-discuss@lists.sudoroom.org">sudo-discuss@lists.sudoroom.<wbr>org</a><br>
<a href="https://sudoroom.org/lists/listinfo/sudo-discuss" rel="noreferrer" target="_blank">https://sudoroom.org/lists/<wbr>listinfo/sudo-discuss</a><br>
<br></blockquote></div><br></div></div></div>