I think they are asking specifically for a dual-LoRa device. If I understand correctly, Fitz has a handful(?) of dual-lora prototype boards that may or may not work with the current build of the firmware (likely it would need some tweaking of pins, etc. since I never got my hands on one for testing).
I did some hacking last year on a dual lora setup. I'm pretty sure I used the LoPy4 and an old-school ESP8266-compatible disaster.radio LoRa hat (what's up from 2018! idk if anyone else still has any of these...). I used the LoPy4 because other boards don't break out all the pins needed for the dual-lora setup. The point is, i was able to get two lora modules connected to an ESP32, but I didn't do much more than that.
Fitz, I'll DM you about getting at least one of those prototypes sent my direction so I can validate that it works with the firmware (idk how soon I'll get around to it, but eventually).
-Grant
On 5/6/21 1:29 AM, Wensheng Xie wrote:Yes, the current firmware runs on
TTGO LoRa32 V2.1 ESP32 OLED 0.96
Generally, I think the firmware should work for these boardsOn 2021/5/6 下午12:06, Code Bus wrote:Hi. I am interested in development of this dual-module board, a friend doing amateur radio pointed me to this since I have a foot in the world of radio mesh and an interest in longer wavelength comms.This runs the disaster.radio firmware normally loaded onto those Ali-vendor sold TTGO LoRa modules?_______________________________________________ DisasterRadio mailing list DisasterRadio@lists.sudoroom.org https://sudoroom.org/lists/listinfo/disasterradio_______________________________________________ DisasterRadio mailing list DisasterRadio@lists.sudoroom.org https://sudoroom.org/lists/listinfo/disasterradio