On Tue, May 20, 2014 at 8:35 PM, brad gaffney <bgaffney@gmail.com> wrote:
I had two problems with my module, on my Ubuntu 12.04 system.

Thanks you so much for reporting this and for including details!

Could you try to connect to the stationsquare network and then ssh into your node as root (should be ssh root@172.30.0.1) and check if ifconfig lists an interface called l2tp0 and if the command "batctl o" shows any other nodes in range? Could you also try to ping 10.42.10.10 (the internet gateway)?

It sounds like your node is not tunneling to the internet gateway or something is going wrong with the tunnel. Honestly we've been having issues with the exit node, so the problem could be at our end, but if you give us that info from the node we can at least see if it thinks it's connected. We're working on monitoring tools to better troubleshoot these issues.

Could you also give me the MAC/HWaddr address of the br-openmesh interface of the node?

--
marc/juul
 
The admin network stationsquare works fine, but when I connected to peoplesopen.net I could not find any name servers.
When I look for help at h.sudomesh.org I get a access forbidden message.

 

root@reindeer:~ > ifconfig wlan0
wlan0     Link encap:Ethernet  HWaddr f4:b7:e2:87:2a:69  
          inet addr:10.0.37.190  Bcast:10.255.255.255  Mask:255.0.0.0
          inet6 addr: fe80::f6b7:e2ff:fe87:2a69/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1400  Metric:1
          RX packets:4 errors:0 dropped:0 overruns:0 frame:0
          TX packets:183 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:790 (790.0 B)  TX bytes:19577 (19.5 KB)
root@reindeer:~ > iwconfig wlan0
wlan0     IEEE 802.11abgn  ESSID:"peoplesopen.net"  
          Mode:Managed  Frequency:2.422 GHz  Access Point: 00:15:6D:72:05:26   
          Bit Rate=54 Mb/s   Tx-Power=16 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
          Link Quality=52/70  Signal level=-58 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:188   Missed beacon:0


brad@reindeer:~ > nslookup yahoo.com
;; connection timed out; no servers could be reached


The /etc/resolv.conf file contains


nameserver 127.0.0.1

I replaced this with

nameserver 10.0.37.1


and the name lookups worked, but the browser still could not resolve names.
That's where I left it.

brad@reindeer:~ > nslookup peoplesopen.net
Server:         10.0.37.1
Address:        10.0.37.1#53

Non-authoritative answer:
Name:   peoplesopen.net
Address: 199.175.52.221

Did anyone else have similar issues?

_______________________________________________
mesh mailing list
mesh@lists.sudoroom.org
https://lists.sudoroom.org/listinfo/mesh