sudo mesh has been working on this quite a bit, and potentially found some work arounds, it would be great if there's any new info to add here https://noisebridge.net/wiki/Sparky#Watchdog_problems.21


On Fri, Dec 20, 2013 at 10:05 AM, Adrian Chadd <adrian@freebsd.org> wrote:
Hi,

I've asked someone to send me one. I have the datasheets for the
AR23xx stuff but I don't have any working hardware so I can't help
diagnose what's going on.

If I can get one of each of the CPU types then I can try to figure out
what's going on. I'll also see if there's an external watchdog circuit
somewhere.

Thanks,



-a


On 20 December 2013 09:59, Dana <dana-lists@sonic.net> wrote:
> Hello mesh folks,
>
> I took some donated Sparky boards from Noisebridge with the intention to use
> them as wireless sensor nodes (environmental monitoring, etc) but while I
> can get OpenWRT installed I run into problems with the hardware watchdog
> rebooting the device every 5 minutes. It looks like OpenWRT includes support
> for the ar2315 watchdog but something isn't working. Have you all found a
> solution or workaround for this?
>
> Thanks, dana
>
>
>
> _______________________________________________
> mesh mailing list
> mesh@lists.sudoroom.org
> http://lists.sudoroom.org/listinfo/mesh
_______________________________________________
mesh mailing list
mesh@lists.sudoroom.org
http://lists.sudoroom.org/listinfo/mesh



--
ThanX,
;+)

https://www.noisebridge.net/wiki/Fort