I'd have to disagree on this one. Servos have an encoder that allows the motor to know it's exact position. Stepper motors will miss steps and won't be able to catch itself. I guess this is an accuracy vs precision argument as at least the stepper motor is stable in it's adjusted position.

If you are getting oscillations or wobbles in your position with a servo then most of the time you are sending it a corrupted signal. This happens with microcontroller code whose servo libraries are not interrupt driven as the PWM signal gets corrupted by other processes. Or with unshielded cables that are experiencing crosstalk from other wiring.

As with all things the hardware has to be matched with the job though. If your servo gears have lots of slop or aren't up to the job of positioning something heavy they will struggle. It's possible to use a potentiometer as a secondary encoder of position to help if your gearing is introducing extra error.

-=[Scott]=-

On Fri, Mar 29, 2013 at 2:37 PM, David Rorex <drorex@gmail.com> wrote:

If you want ultra precise control, you need stepper motors. Or maybe really expensive servos would work, but the cheap servo's I've used are only accurate to a couple degrees and can wobble a little.

On Thu, Mar 28, 2013 at 3:13 PM, Scott Garrison <scottrobertgarrison@gmail.com> wrote:

I'd be interested in doing something similar for controlling a camera. I also have an extra house satellite dish that I would love to put to use. I have experience controlling servos with microcontrollers.

-Scott

On Wed, Mar 27, 2013 at 3:07 PM, Steve Berl <steveberl@gmail.com> wrote:

I notice on the etherpad that someone is interested in a 2 axis control for a radio dish. I'm interested in that also. In particular I want to mount a house satellite TV dish sized antenna on a 2 axis mount for radio astronomy use. It requires smooth and precise, but slow movement.

Who is it that is interested in this project? Can you get in contact with me?

-steve

On Sun, Mar 24, 2013 at 5:43 PM, <hol@gaskill.com> wrote:

Howdy folks,

We are two days away from the beginning of the second microcontroller project hacking night at sudo room. As someone suggested, I created a facebookpage for the event. Please invite people you think might be interested! I previously ordered 10 ATMega328p chips and crystals, and will have them available at cost ($5) for those just starting out who want a basic controller.

Event Link:
https://www.facebook.com/events/502675869769339/

Also, there is an etherpad to jot down projects you intend to work on in case anyone out there is interested in collaborating:
https://pad.riseup.net/p/microbotics
This will be an ongoing document, and is intended to provide a subsystem-level view of project elements in order to encourage people to join together to work on individual elements or principles where interests overlap in a way that permits a limited scope of collaboration, without having to commit to recurring work on an entire project.

We had some interesting projects last time and I expect even more this time, hopefully with a few people from the last event returning to show what they've done with their projects since then. Personally I will try to go back and forth between 50% working on 2-3 projects, 30% getting newbies started on their controller builds, and 20% snacking/shooting the shit. Looking forward to seeing y'all!

Cheers,
Hol
_______________________________________________
sudo-announce mailing list
sudo-announce@lists.sudoroom.org
http://lists.sudoroom.org/listinfo/sudo-announce

--
-steve

_______________________________________________
sudo-announce mailing list
sudo-announce@lists.sudoroom.org
http://lists.sudoroom.org/listinfo/sudo-announce

_______________________________________________
sudo-announce mailing list
sudo-announce@lists.sudoroom.org
http://lists.sudoroom.org/listinfo/sudo-announce