thanks torrie!
On 2014-08-17 18:17, Torrie Fischer wrote:
On Sunday, August 10, 2014 08:06:47 PM Torrie Fischer wrote:The drill press speed controller has some faulty wiring. I got zapped by it today, though after having used it for quite some time. I have made note of this with affixing a sign to the press and locking out the plug with a zip- tie. I will be picking up an AC outlet tester ASAP to sort out what is amiss unless someone else can figure it out or locate one before I anticipate returning on Wednesday.A bit later than planned for various reasons, but I tested the drill's power with an AC tester today. Turns out that the neutral and hot were reversed on the orange/white monstrosity of an extension cable. I also said I'd be ordering some things from McMaster and have them here by now, but I decided to hold off until I knew if I needed anything to fix the drill. As consequence, I'm adding some male and female NEMA 5-15 connectors to the order to properly fix the two cables. I'm going to assume that the drill itself is wired correctly, considering how the extension cable is really the only new variable that was introduced recently. I have removed the lockout and deemed it safe for use, with proper training of course :) _______________________________________________ sudo-discuss mailing list sudo-discuss@lists.sudoroom.org https://lists.sudoroom.org/listinfo/sudo-discuss