It will be awesome to have someone with experience to run some cisco routing/switching training/class.
We have 2 spare switch racks that can be use for that training, if needed.On Fri, Jul 24, 2015 at 4:01 PM, Adrian Chadd <adrian.chadd@gmail.com> wrote:After blackhat/defcon,, sure. :)
-a
On 24 July 2015 at 16:01, Adrian Chadd <adrian.chadd@gmail.com> wrote:
> The 3750 is gige.
>
> The 3550 may be 10/100, but you do get to do decent L3 functions +
> VLAN stuff on it, so it's not a complete loss.
>
>
>
> -adrian
>
>
> On 24 July 2015 at 15:55, Ronald Cotoni <setient@gmail.com> wrote:
>> For Noisebridge, those switches use a lot of power, are not gigabit and we
>> just recently put in some nice fancy equipment. We also have a stack of
>> other cisco gear that we do not use. I am not quite sure where we could use
>> them except by taking them apart for components, maybe. If you have that
>> many, it might be nice to start a Cisco class at noisebridge or Sudoroom and
>> setup all sorts of fun things.
>>
>> On Fri, Jul 24, 2015 at 2:52 PM, Adrian Chadd <adrian.chadd@gmail.com>
>> wrote:
>>>
>>> On 24 July 2015 at 12:53, danarauz@gmail.com <danarauz@gmail.com> wrote:
>>> > Hey Adrian, where are you from? Sudo or Noisebridge?
>>> > I need to state who will receive them, and also a thank you letter would
>>> > be
>>> > nice to send.
>>>
>>> I've shown up to both? :)
>>>
>>> I think splitting the switches 50/50 between the two groups would work out
>>> best.
>>>
>>>
>>>
>>> -adrian
>>> _______________________________________________
>>> Noisebridge-discuss mailing list
>>> Noisebridge-discuss@lists.noisebridge.net
>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>
>>
>>
>>
>> --
>> Ronald Cotoni
>> Systems Engineer
--- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Help open a people-powered common space in Oakland, California!- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -