Okay.

For my nice surprise, the router arrived today. And of course, I jumped onto flashing it right away. 

The process in a nutshell, for those like me, if you ever have updated a home router's firmware, well.. it is basically the same process. Which I had in the past.The only part that needs most attention is to grab the correct binary version to use. And when done, point browser to the new ip: 192.168.1.1.

I have updated Cisco 2950 and 2960s managed switches which requires TFTP server and a series of commands, etc. For some reason I was expecting something something similar with OpenWRT. Oh well.

Right now I perusing the interface and I am impressed w all those goodies in it! 

Thank you to all of those that reply. It bust confidence when someone has your back. ;)

Thanks,

Daniel




On Wed, Jun 17, 2015 at 2:26 PM, danarauz@gmail.com <danarauz@gmail.com> wrote:
awesome max, i also can help you twisting someone's arm too; if you need help. :)


On Wed, Jun 17, 2015 at 2:20 PM, max b <maxb.personal@gmail.com> wrote:
/me commences to twist arm....

On Wed, Jun 17, 2015 at 2:01 PM, Adrian Chadd <adrian@freebsd.org> wrote:
I could have my arm twisted to show up again on Thursday..

-a


On 17 June 2015 at 16:59, max b <maxb.personal@gmail.com> wrote:
> Rad. the TP-Link should be more than enough for your purposes, but it'll be
> fun to tinker with the raspberry pi. I can make sure to be there next
> thursday and we can plan on walking through this (I might need a
> reminder....)
>
> On Wed, Jun 17, 2015 at 1:44 PM, danarauz@gmail.com <danarauz@gmail.com>
> wrote:
>>
>> Thank you all for your replies, very appreciated it.
>>
>> Based on suggestions and to start with a solid first step, just ordered
>> the TP-Link WDR4300: http://tinyurl.com/l88qfze
>> Along the way, I also expecting the RPI 2 B: http://tinyurl.com/phx5myo
>>
>> I intent to be at tonight Sudoroom's meeting, and then next week at the
>> SudoMesh's meeting, Thursday. I expect that by then the two lost souls may
>> have arrived home. :)
>>
>> I got sonic.net DSL at home, uploading speeds I don't recall (but in the
>> couple of 100kbps, but downloading its good enough,close to around 8mbps.
>>
>> Glenn, I will see what I can do.
>>
>> Thank all.
>>
>>
>>
>>
>> On Wed, Jun 17, 2015 at 12:40 PM, Hep Svadja <hepkitten@gmail.com> wrote:
>>>
>>>
>>> http://makezine.com/projects/browse-anonymously-with-a-diy-raspberry-pi-vpntor-router/
>>>
>>> -Hep
>>>
>>> On Wed, Jun 17, 2015 at 12:36 PM, Adrian Chadd <adrian@freebsd.org>
>>> wrote:
>>>>
>>>> If you need VPN encrypt/decrypt performance, then yes you'll want one
>>>> of the intel based things with supported crypto offload. The
>>>> performance difference is pretty staggering.
>>>>
>>>>
>>>>
>>>> -adrian
>>>> _______________________________________________
>>>> sudo-discuss mailing list
>>>> sudo-discuss@lists.sudoroom.org
>>>> https://sudoroom.org/lists/listinfo/sudo-discuss
>>>
>>>
>>>
>>>
>>> --
>>>
>>>     HEPIC PHOTOGRAPHY
>>> 415 867 9472 || http://hepic.net
>>>
>>> _______________________________________________
>>> sudo-discuss mailing list
>>> sudo-discuss@lists.sudoroom.org
>>> https://sudoroom.org/lists/listinfo/sudo-discuss
>>>
>>
>>
>>
>> --
>>
>> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
>> - - - - - - - - - - - - -
>> Help open a people-powered common space in Oakland, California!
>> https://omnicommons.org/donate
>> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
>> - - - - - - - - - - - - -
>>
>>
>>
>> _______________________________________________
>> mesh mailing list
>> mesh@lists.sudoroom.org
>> https://sudoroom.org/lists/listinfo/mesh
>>
>
>
> _______________________________________________
> mesh mailing list
> mesh@lists.sudoroom.org
> https://sudoroom.org/lists/listinfo/mesh
>




--

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Help open a people-powered common space in Oakland, California!
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -





--

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -