Yes there is mg chemicals makes photopolymer resin and films
On Dec 1, 2017 10:43 AM, "Cere Davis" <ceremona@gmail.com> wrote:Ya, but pyralux, isn’t photosensitive. I wonder if there is some kind of brush-on polymer paint that is UV curable and the rest can be washed off? The UV cured portion would change from being somehow water soluble to acetone/alcohol soluble. Maybe that’s even what you’re talking about. Would love to know about it if it exists.On Thu, Nov 30, 2017 at 11:45 AM, Adam <me@adammunich.com> wrote:Actually it just occurred to me...
If you wrote an app that calculates the screen size and displays Gerber images, then with a blue filter and fresnel lens you could easily expose photosensitive PCBs (and even align two side ones).
On Nov 30, 2017 9:41 AM, "Jake" <jake@spaz.org> wrote:you can also do the thing Morgan was doing, where you spray paint the copper
and then use the laser cutter to remove paint wherever you want, and then etch.
and there's always the toner-transfer method if you can get a laser printer to
work.
On Thu, 30 Nov 2017, Cere Davis wrote:
Might work. Congrats on getting on of those! Ya, like you said, or didn’t
exactly say, I would need a mask that has an adhesive or have to use a
vapor, which I’m really not set up to do. As a plan B. Does anyone know
where I can use a high quality vinyl cutter? AMT has a cutter, but I can’t
get much resolution out of it before something ultimately goes to shit.
On Wed, Nov 29, 2017 at 6:29 PM, Adam <me@adammunich.com> wrote:
i bought a form labs printer, might be good for making masks?
- - - - Begin automatically generated footer - - - -
I seek to understand, and aim to create.
Weblog: http://adammunich.com
PGP Public Key: https://pgp.mit.edu/pks/lookup?search=adam+munich
On Wed, Nov 29, 2017 at 6:25 PM, Cere Davis <ceremona@gmail.com> wrote:
I gave up after a thousand paper jams etc. Sucked.
...emailing on the go...
@ceremona
http://ceredavis.com
On Nov 29, 2017 5:55 PM, "Cere Davis" <ceremona@gmail.com> wrote:
Ya, it keeps wanting a cleaing sheet and then jamming when I try to feed
it in via the tray or manual. Gah!
On Wed, Nov 29, 2017 at 5:24 PM, Cere Davis <ceremona@gmail.com> wrote:
Just tried the other printer after I sent that message. I think I’m on
the right track now. It was the printer with an asset label but without a
paper tray, initially.
On Wed, Nov 29, 2017 at 5:17 PM, Jake <jake@spaz.org> wrote:
did you try both? did either one of them print a test page?
(assuming there
was paper in the tray or in the manual-feed loader)
note that the printer will throw an error if the paper tray is not
present.
On Wed, 29 Nov 2017, Cere Davis wrote:
Ya, no, this printer is just not going to print. If you’re coming
over to
sudo tonight, I would love to know what the magic is to making this
thing
work.
On Tue, Nov 28, 2017 at 9:15 PM, Jake <jake@spaz.org> wrote:
one of them works, the other has mechanical problems i think (and has
no
paper
tray?)
please put paper notes on the printers with whatever you discover,
for the
next
person...
here's my imgur instructable about how to use these printers to etch
pyralux
circuits (don't forget to bake the ink on before trying to etch!):
https://imgur.com/a/TbzsP
-jake
On Fri, 8 Sep 2017, Cere Davis wrote:
Hey is the wax primer working at Sudo or what needs to be done to
get it
functional?
Thanks,
Cere
--
*Cere Davis*
Science-Art | Kinetic Sculpture
CereDavis.com
@ceremona <http://Twitter.com/Ceremona>
--
*Cere Davis*
Science-Art | Kinetic Sculpture
CereDavis.com
@ceremona <http://Twitter.com/Ceremona>
--
*Cere Davis*
Science-Art | Kinetic Sculpture
CereDavis.com
@ceremona <http://Twitter.com/Ceremona>
--
*Cere Davis*
Science-Art | Kinetic Sculpture
CereDavis.com
@ceremona <http://Twitter.com/Ceremona>
_______________________________________________
sudo-discuss mailing list
sudo-discuss@lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
--
*Cere Davis*
Science-Art | Kinetic Sculpture
CereDavis.com
@ceremona <http://Twitter.com/Ceremona>
--