What I was tryn to say was, I will try to schedule an onsite inspection either Thursday aft or Friday aft. dep on inspector availability.Not possible to schedule an inspection before picking up the permits and the Dept is presently closed and doesn't open again until about 8, so we can't have an inspection at that time.I picked up a check from Matt G. so no worries about attending for payment.If anyone wants to go with, I'm not sure exactly what time I'll be going to 250 tomorrow, but I'll give you a heads up. It's nothing interesting, it's mostly picking up paperwork, paying, then scheduling.If someone else wants to pick up instead come get the check from me by all means, I am slammed.If someone else does end up going, please let me know first so I can change my day around, let me know when the inspection is scheduled, and while you're there, take a photo of the filled-out trade permit form with your phone before submitting, and leave the field stuff they give ya in the secure storage room somewhere. I do think it'd be a good idea if I'm there for the inspection, since the inspector might be Wing.Best,David
On Tuesday, May 3, 2016, Matt Senate <mattsenate@gmail.com> wrote:Ok, so either 8am tomorrow morning or some time on Thurs? I'd be fine with going for the sake/experience of it, or not. Just lmk.I'm not at omni yet, I'll be by tonight for hardware hacknight and such.Yeah, there are also many items that do not need to be stored in the entrance hall, so I would like to put them away properly for good measure.Finally, I'm cc'ing sudo room and ccl about this timeline and working together to do an E-waste run before the rough inspection. Anyone available to make that run? I suggest Universal Waste Management 721 37th Ave (just off the fwy) open 8am-4pm every day (and they don't charge for most e-waste and recyclables) http://www.unwaste.com/// MattOn Tue, May 3, 2016 at 5:09 PM, David Keenan <dkeenan44@gmail.com> wrote:Ok. Those cmtee mtgs seem to be 2h so I doubt that would be enough time for you, Matt. Plus if I recall there is usually an advance time window for building inspections of at least 2h.I have to be back at Building Dept Thursday AM so I may schedule for Thurs aft, if that time is available from the city. Otherwise I'll schedule for Fri aft as I am down at Health on Fri AM.Also, I stopped by Omni to help u move stuffs but you musta left already.The area of work should have about 5' clear (opposite the exposed studs) so if anyone has time to move the stuff that's presently being stored there, that'd be really great.I'll go pick up a check from Matt G. and file for the elec permit when I go pick up the plans tomoro.Best,David
On Tuesday, May 3, 2016, Matt Senate <mattsenate@gmail.com> wrote:I'm busy tomorrow at 9:30am for the BID Promotion & Security Committee meeting as well at ~12pm for a meeting about preserving the gardens at laney college. I could go downtown between these two times, for instance. Or I could go before the BID meeting in the morning between 8-9am.It seems reasonable to schedule the rough inspection on Thursday.// MattOn Tue, May 3, 2016 at 4:43 PM, Matt Griffin <griffin.matt.j@gmail.com> wrote:SweeetWeve got funds so if u wanna grab a check from me thats coolMattGood news, the application just finished its final stage of processing a few minutes ago, so it (and an elec. trade permit if we choose to add that on, which we probably should) is ready for pick up tomorrow.Can anyone with a bank card (to pay for the elec permit) meet me downtown tomoro, and if so, when is good? Or I can pick up a blank check from someone? The electrical permit should come in under $300, but I don't have the exact Amy (Matt G., Do we have the funds?)I will also schedule a rough inspection tomorrow, either same day or Thursday dep. on Matt S.'s schedule? When is good, Matt S.?Best,David
On Tuesday, May 3, 2016, David Keenan <dkeenan44@gmail.com> wrote:Also, we should figure a time to go back to the city and pull the attendant elec permit if necc. I'm going to see if it won't make things too complicated to use the completion permit for elec work done onthe acoustic wall to cover this area as well, so as to save us $2-300, but we'll probably need to figure that out at the counter when we go pick up the field copy & job card.
On Tuesday, May 3, 2016, David Keenan <dkeenan44@gmail.com> wrote:Hello all,I just received word that the plancheck is done for the drywall permit and we are just waiting on final processing over the next cpl days.I will be out of town this weekend unfo but this might be a good time to procure DW and any other supplies we may not have on hand (mud, tape, sandpaper, screws, primer, paint etc). Does anyone wanna take the lead on this, or sched a work party to put up the DW soon?It also means that barring any reasons to the contrary I can probably schedule the rough inspection before Sat.Matt, since you prepped the planset may I ask, what is your schedule this week? Are mornings ok?Best,David