Still not working though
Unplug/plug usb cables from 12v cig adapter. Done
On Jun 3, 2017 1:51 PM, "Jake" <jake@spaz.org> wrote:in order to get the system to work, you really need to do a power cycle of the
whole system. If you don't do it exactly this way, it won't work, even back
when the system was fine:
open the big cabinet door with the battery and beaglebone and voip box in it,
locate the two-USB power socket (a car cigarette lighter USB charge socket
wired to the battery) and you'll see that it has TWO USB-A plugs in it.
unplug BOTH USB-A cables from the round USB socket thing, wait at least ten
seconds, and then plug them both back in. One powers the beaglebone, the other
powers the powered USB hub.
If you don't do it this way, the card reader and beaglebone won't talk to each
other :(
and that's assuming that everything is fine hardware-wise.
-jake
On Sat, 3 Jun 2017, robb wrote:
New reader installed. Green light blinks after reading card but lock not
responding
On Jun 3, 2017 12:07 PM, "Charley Sheets" <rcsheets@acm.org> wrote:
On Thu, 1 Jun 2017 19:23:21 -0700 (PDT)
Jake <jake@spaz.org> wrote:
thanks Charley!
we have a few readers but there seems to be some problem that might
not be the reader. i'll take a look and let you know!
It's mainly the card reader and a beaglebone or something, right?
--
Charley Sheets
_______________________________________________
sudo-discuss mailing list
sudo-discuss@lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss