I re-attached the wires and it's working again.

Also: Hol donated a multimeter (!)

Also also: We need a nice little box that can contain the raspberry pi and a power supply and maybe a few other small things and which looks nice and can mount on the wall. The craziness with the imac and cardboard box and wires everywhere is no good. Someone bring a suitable wall-mountable box (urban ore?) and someone else (maybe me) will make it all pretty.



On Tue, Jul 16, 2013 at 1:08 PM, Max Klein <isalix@gmail.com> wrote:
read on if you have a multimeter to lend, or want to understand the door more:


==so-far==

a wire came off the rpi gpio pinout.

i looked in the code and realized that it is supposed to go to GPIO11,

reattached it but still wasn't working, even though confrimed opendoor.py was being called

then i shorted past the relay that gpio11 goes to and the door buzzed.

we dont have a multimeter so i can confirm if gpio11 is going high, or the relay is burned out.

can you help please?

_______________________________________________
sudo-discuss mailing list
sudo-discuss@lists.sudoroom.org
http://lists.sudoroom.org/listinfo/sudo-discuss