Hey folks!

I, Dusty, and Anka have been putting in some time with the door to SUDO and CCL. We have reached a point were it is important to get information/input from you...as we can't proceed with this project without it.

The basic needs for this door:

- The door needs to sweep/open outward, toward the main exits of the building. As such it needs to be "hanged" in a way opposite of it's current (now former) position.

- There needs to be a "panic bar" installed along with a nice "door closer". We have the door closer and a panic bar. The panic bar as selected by Marc (who knows more about this stuff than Anka and myself).

Needed from SUDO/CCL folks:

- In order to re-hang this door, we need to figure out how the panic bar will work with the existing door frame.

- We need to have folks from SUDO relay information about, or instal (preferred), a panic bar system that will work with whatever electronic entrance mechanism you will want for your space.

A note on Labor:

Anka and myself, Dusty, are working with doors throughout the building. We are learning as we go and I feel that it's much slower than I anticipated. Each door in this place is different and most are quite wonky. I will be out of town for the month of July...and subsequently unable to work on this project until my return in August.

We want you to have a great door for your space, and we want it to be exactly what you want. :). Can SUDO folks take this issue to a meeting and have it discussed (if appropriate)?

Thanks!

Dusty