flip your card over
On Mon, 5 Jun 2017, Ken Litchfield wrote:
Heyall,
Just went out and checked and not working.
Green light stays on, no clicking sound when passing the card, and no
reaction in door. Dead to the world.
Others say they just tried it too and not working for them so not my card.
Thanks Ken
On Mon, Jun 5, 2017 at 7:36 PM, Michael Arent <arent1506@gmail.com> wrote:
Thanx, Jake!
Cheers!
M i c h a e l A r e n t
Counter Culture Labs
On Mon, Jun 5, 2017 at 2:18 PM Jake <jake@spaz.org> wrote:
i'll come fix it
On Mon, 5 Jun 2017, Patrik D'haeseleer wrote:
Any progress on fixing door access? I'm already hearing people talkabout
making a bunch more physical keys, which I think is a solution we reallyin
want to avoid...
I know this is not a popular opinion around here, but I would still be
favor of adopting a commercial door access solution - possiblyincluding a
maintenance contract so we can get it fixed same day if something goeswrote:
wrong.
Patrik
On Sun, Jun 4, 2017 at 9:47 PM, Julio Rios <julio.rios@gmail.com>
wrote:
I tried the same thing with Robb and still no go.
On Sat, Jun 3, 2017, 14:47 danarauz@gmail.com <danarauz@gmail.com>
is not
A quick note: there is a network cable that comes from the top of the
ceiling above the door (as I recall its blue and its rolled up) that
secondterminated but the other end it's plugged into the switch at the
goesfloor.
It you want, it can be used for the door, it seems more reliable and
safer than the current network cable setup in use. The current setup
boxto the floor and plugs into an small switch that often folks
accidentally disconnect.
Thx!
On Saturday, June 3, 2017, robb <sf99er@gmail.com> wrote:
Still not working though
On Jun 3, 2017 2:07 PM, "robb" <sf99er@gmail.com> wrote:
Unplug/plug usb cables from 12v cig adapter. Done
On Jun 3, 2017 1:51 PM, "Jake" <jake@spaz.org> wrote:
in order to get the system to work, you really need to do a power
cycle of the
whole system. If you don't do it exactly this way, it won't work,
even back
when the system was fine:
open the big cabinet door with the battery and beaglebone and voip
in it.in it,
locate the two-USB power socket (a car cigarette lighter USB charge
socket
wired to the battery) and you'll see that it has TWO USB-A plugs
beaglebone,
unplug BOTH USB-A cables from the round USB socket thing, wait at
least ten
seconds, and then plug them both back in. One powers the
talkthe other
powers the powered USB hub.
If you don't do it this way, the card reader and beaglebone won't
lockto each
other :(
and that's assuming that everything is fine hardware-wise.
-jake
On Sat, 3 Jun 2017, robb wrote:
New reader installed. Green light blinks after reading card but
wrote:not
responding
On Jun 3, 2017 12:07 PM, "Charley Sheets" <rcsheets@acm.org>
might
On Thu, 1 Jun 2017 19:23:21 -0700 (PDT)
Jake <jake@spaz.org> wrote:
thanks Charley!
we have a few readers but there seems to be some problem that
download/>Signal: 415.336.9143 <(415)%20336-9143> <https://whispersystems.org/>not be the reader. i'll take a look and let you know!
It's mainly the card reader and a beaglebone or something, right?
--
Charley Sheets
_______________________________________________
sudo-discuss mailing list
sudo-discuss@lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
--
Daniel
WhatsApp: 415.336.9143 <(415)%20336-9143> <https://www.whatsapp.com/
-
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-- - - - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
_______________________________________________
discuss mailing list
discuss@lists.omnicommons.org
https://omnicommons.org/lists/listinfo/discuss
_______________________________________________
discuss mailing list
discuss@lists.omnicommons.org
https://omnicommons.org/lists/listinfo/discuss
_______________________________________________
building mailing list
building@lists.omnicommons.org
https://omnicommons.org/lists/listinfo/building