https://sudoroom.org/mediawiki/api.php?action=feedcontributions&feedformat=atom&user=Ubiquitous
Sudo Room - User contributions [en]
2026-04-25T01:09:28Z
User contributions
MediaWiki 1.37.2
https://sudoroom.org/mediawiki/index.php?title=Beagle_Bone_Black&diff=8259
Beagle Bone Black
2014-06-18T04:22:20Z
<p>Ubiquitous: /* Configuring B.A.T.M.A.N to Mesh with Sudo Mesh */</p>
<hr />
<div>See Also: [[Mesh/Hardware_support#Fourth_milestone | Mesh/Hardware Fourth Milestone]]<br />
<br />
notes about BBB - Beagle Bone Black<br />
<br />
== OS Install ==<br />
<br />
=== OpenWRT ===<br />
* https://github.com/artekw/openwrt-bbb<br />
<br />
=== Adafruit tutorial ===<br />
https://learn.adafruit.com/beaglebone-black-installing-operating-systems/angstrom<br />
<br />
<br />
== first light ==<br />
Just booting up...<br />
<br />
=== using an FTDI device plugged into J1 pins ===<br />
<br />
find the serial port for the FTDI USB adapter <br />
ls /dev/tty*<br />
<br />
* might be /dev/ttyAMA0 on linux<br />
* might be /dev/tty.usbmodemfa133 on mac<br />
<br />
Wiring from the FTDI device: <br />
* BBB - FTDI<br />
* pin 1 GND - GND<br />
* pin 4 RX - TX<br />
* pin 5 TX - RX<br />
<br />
in terminal:<br />
screen <usbdevicename> 115200<br />
<br />
* first login with root, no password<br />
<br />
<br><br><br><br />
'''Mesh the planet...'''<br />
=Configuring B.A.T.M.A.N to Mesh with Sudo Mesh= <br />
This tutorial assumes that you have your Beagle Bone configured running Debian Wheezy. It is all recommended that you disabel network-manager. <br />
<br />
<br />
Add batman module to the kernel <br />
<pre><br />
modprobe batman-adv<br />
</pre><br />
Add B.A.T.M.A.N interface<br />
<pre><br />
batctl if add eth0<br />
</pre><br />
Disable Wifi<br />
<pre><br />
ifconfig wlan0 down<br />
</pre><br />
Set MTU<br />
<pre><br />
ifconfig wlan0 mtu 1532<br />
</pre><br />
Turn on Ad-Hoc Mode and connect to the SSID ppslopen.net-node2node with the Mac Address CA:FE:C0:DE:F0:0D on Channel 11<br />
<pre><br />
iwconfig wlan0 mode ad-hoc essid pplsopen.net-node2node ap CA:FE:C0:DE:F0:0D channel 11<br />
</pre><br />
Connect B.A.T.M.A.N interface to Wlan<br />
<pre><br />
batctl if add wlan0<br />
</pre><br />
Turn on wlan0 and bat0 interfaces<br />
<pre><br />
ifconfig wlan0 up<br />
ifconfig bat0 up<br />
</pre><br />
Connect to your network. Subject to change depending on our network's subnet<br />
<pre><br />
ifconfig bat0 10.200.8.1<br />
route add default gw 10.0.99.1<br />
</pre><br />
Enable Port Forwarding<br />
<pre><br />
echo 1 > /proc/sys/net/ipv4/ip_forward <br />
</pre></div>
Ubiquitous
https://sudoroom.org/mediawiki/index.php?title=Beagle_Bone_Black&diff=8258
Beagle Bone Black
2014-06-18T04:07:06Z
<p>Ubiquitous: </p>
<hr />
<div>See Also: [[Mesh/Hardware_support#Fourth_milestone | Mesh/Hardware Fourth Milestone]]<br />
<br />
notes about BBB - Beagle Bone Black<br />
<br />
== OS Install ==<br />
<br />
=== OpenWRT ===<br />
* https://github.com/artekw/openwrt-bbb<br />
<br />
=== Adafruit tutorial ===<br />
https://learn.adafruit.com/beaglebone-black-installing-operating-systems/angstrom<br />
<br />
<br />
== first light ==<br />
Just booting up...<br />
<br />
=== using an FTDI device plugged into J1 pins ===<br />
<br />
find the serial port for the FTDI USB adapter <br />
ls /dev/tty*<br />
<br />
* might be /dev/ttyAMA0 on linux<br />
* might be /dev/tty.usbmodemfa133 on mac<br />
<br />
Wiring from the FTDI device: <br />
* BBB - FTDI<br />
* pin 1 GND - GND<br />
* pin 4 RX - TX<br />
* pin 5 TX - RX<br />
<br />
in terminal:<br />
screen <usbdevicename> 115200<br />
<br />
* first login with root, no password<br />
<br />
<br><br><br><br />
'''Mesh the planet...'''<br />
=Configuring B.A.T.M.A.N to Mesh with Sudo Mesh= <br />
This tutorial assumes that you have your Beagle Bone configured running Debian Wheezy. <br />
<br />
<pre><br />
<br />
modprobe batman-adv<br />
batctl if add eth0<br />
ifconfig wlan0 down<br />
ifconfig wlan0 mtu 1532<br />
iwconfig wlan0 mode ad-hoc essid pplsopen.net-node2node \<br />
ap CA:FE:C0:DE:F0:0D channel 11<br />
batctl if add wlan0<br />
ifconfig wlan0 up<br />
ifconfig bat0 up<br />
ifconfig bat0 10.200.8.1<br />
route add default gw 10.0.99.1<br />
echo 1 > /proc/sys/net/ipv4/ip_forward <br />
<br />
</pre></div>
Ubiquitous