Difference between revisions of "3DPrinting"

From Sudo Room
Jump to navigation Jump to search
(redirect to Printing -- everything on here has been merged into Type_A_Machine)
 
(26 intermediate revisions by 4 users not shown)
Line 1: Line 1:
[[File:3dprinterfisheye02.jpg|thumb]]
#REDIRECT [[Printing]]
 
==Hardware==
 
We currently have the following 3D printers:
 
*[[O:5|Type A machines Series 1]]
 
 
= Documentation =
 
''We currently don't have great documentation right now that covers turning on a printer, connecting it to the computer, calibration, and setting it up. We are working on that.''
 
== Overview ==
 
''Quick and dirty overview''
 
* Turn on the 3D Printer (switch is on the back right side)
* Make sure the 3D Printer is connected by USB to the desktop
* Start the program Repetier-Host http://www.repetier.com/documentation/repetier-host/
* Calibrate the printer
* Load your STL file (model of the 3D Printout)
* Slice the STL file into G-Code
* Print
* Post-Print - remove from the 3D printer bed with a razor
 
== Gallery of Creations ==
 
<gallery widths="140px" heights="140px" perrow="4">
File:Raspberrypi3dprint.jpg | RaspBerry Pi print-out
File:Sudoroom_photo.jpg | Our Office
File:3dprintng.jpg | Creation
File:Max3DPrinting.jpg | Today I Learned Class
3D_Printed_Cigar_Rocket.jpg | 3D printed 2-part rocket.  65mm max diameter, 29mm motor bay, tangent ogive curve with internal 2-way structural ribs and support for airspeed sensor pitot tube at nose.
</gallery>
 
[[Category:Projects]]
[[Category:3DPrinting]]
 
= Older Documentation =
 
== Printer Calibration ==
 
Background: Original handwritten piece by Jae. This was the primary documentation for most of the early SudoRoom days and was writen down on a piece of paper. It's quite excellent.
 
<gallery widths="140px" heights="140px" perrow="4">
File:3DPrintApocryphalText1.jpg | Apocryphal Instructions page 1
File:3dPrintApocryphalText2.jpg | Apocryphal Instructions page 2
File:AncientDiagram.jpg | Close up of an ancient hand-drawn diagram by our 3D printing shepherd, Jae
</gallery>
 
[[File:3D Printing Instructions Page 1.jpg|400px|3D Printing - page 1]]

Latest revision as of 19:15, 23 December 2013

Redirect to: