BluBeard

From Sudo Room
Revision as of 18:59, 18 July 2013 by Thex (talk | contribs) (→‎Setup)
Jump to navigation Jump to search
.______    __       __    __  .______    _______     ___      .______       _______  
|   _  \  |  |     |  |  |  | |   _  \  |   ____|   /   \     |   _  \     |       \ 
|  |_)  | |  |     |  |  |  | |  |_)  | |  |__     /  ^  \    |  |_)  |    |  .--.  |
|   _  <  |  |     |  |  |  | |   _  <  |   __|   /  /_\  \   |      /     |  |  |  |
|  |_)  | |  `----.|  `--'  | |  |_)  | |  |____ /  _____  \  |  |\  \----.|  '--'  |
|______/  |_______| \______/  |______/  |_______/__/     \__\ | _| `._____||_______/ 

2U Dual AMD Processor Rack Server aka: Mark IIIR Net Integrator

BluBeardHello.jpg

Initial boot BIOS screen.
RAM module.
SCSI Hard Drive label.

Blah blah blah...

Motherboard: TYAN Thunder K7X (S2468) http://www.tyan.com/archive/products/html/thunderk7x.html

Brochure: http://www.jadecomputers.us/Files/markiiir.pdf

Maintenance

Setup

  • Burn current ISO of Arch Linux to CD https://www.archlinux.org/download/
  • Boot off CD using external USB CD-ROM drive (may require boot order mod in BIOS)
  • Connect ethernet cable to Ethernet Port 1 (enp2s8)
    • run # dhcpcd to start DHCP assignment
    • test connection with a ping # ping -c 3 www.noisebridge.net
    • Now we know the puter fires up and connects to the internets
  • Power off and run GParted to setup partitions systemctl poweroff
    • From GParted configure /dev/sdg as gpt partition with ext4 and boot flag
      • This is a 256MB Flash Drive
    • Create and configure SCSI Hard Drives (/dev/sda thru /dev/sdf)
      • Configured /dev/sda & /dev/sdb with gpt table, 10GB boot and 130GB, both with ext4
  • Reboot with Arch Linux
    • Mount root
      • # mount /dev/sda1 /mnt
    • Mount home
      • # mkdir /mnt/home
      • # mount /dev/sda2 /mnt/home
    • Mount UEFI
      • # mkdir -p /mnt/boot
      • # mount /dev/sdg1 /mnt/boot
  • Install linux base
    • # pacstrap -i /mnt base
      • Select default (all), about 160MB download, 450MB install

Installed Arch Linux July 1, 2013 build Thex (talk) 16:21, 18 July 2013 (PDT)

BluBeard2U.jpg