Boardfab

From Sudo Room
Revision as of 19:59, 21 July 2016 by Rab (talk | contribs) (Added OSH Park note.)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Places to get your circuitboards made, or even populated with parts:

hackvana has an IRC channel on freenode, #hackvana where you can talk with others for advice, including Mitch Davis who runs the company, and ask about your order. Jerkey has used them with satisfaction, but they are not the cheapest. They prefer Paypal, or someone in Australia who can pay in person.



Jerkey used them once and they fucked up the order, possibly because they were replacing their entire website and e-store and payment processing company on that very day. They are cheaper than Hackvana so as long as they don't screw up it might be worth using.

Rab ordered 10pcs- 2 layer PCB three times. Each order was satisfactory. No extra charge for typical silkscreen colors. Faint marks on the pads indicate 100% e-test. No manufacturer's mark placed on either side. 2-3 extra copies were included with each order, possibly to offset any failures. No electrical failures. Some PCBs exhibited: light scratches in solder mask; minor inconsistencies in board outline routing; silkscreen faded or smudged. With Shenzhen DHL shipping (~$20 extra), 7 calendar day turnaround from order placed to received. New/old website setup dichotomy is confusing. Have not used the new website.


Rab abused their job preview function and noticed that it doesn't appear to display tented vias properly. (Renders as untented). Better check your gerbers with gerbv.



You work with a million-dollar truck that's also a one-of-a-kind scientific instrument. Every noteworthy function on this truck passes through a single PCB full of relays and optocouplers in an inaccessible location. Thanks to a PCB design flaw, the board fails in the middle of a three-million-dollar project on another continent. The spare board is also faulty. The manufacturer only made two boards.

After performing the field repair of your career and returning home victorious, you volunteer to reverse-engineer and create a clone of this goddamn board. One so much better designed and more reliable that it never fails again. Your reputation is on the line. Money is no object. And you need the PCBs in 72 hours. Where do you turn?

(Also reportedly used by National Instruments for PCB prototypes)