Difference between revisions of "Brother HL-2270DW"

Jump to navigation Jump to search
70 bytes removed ,  16:13, 3 July 2015
more fixes
(more fixes)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
It's a networked printer. Most operating systems will find it automatically if you're connected to any of these wifi networks:
It's a networked printer. Most operating systems will find it automatically if you're connected to Omni wifi (sudomesh, Omni Ballroom, etc). If you have trouble over the network, you can also connect by USB.
* sudomesh
* sudoroom
* sudoroom24g2
* sudoroom2.4ghz
* sudoroom5ghz
* basement
* Omni Ballroom
If you have trouble over the network, you can also connect by USB.


== Details ==
== Details ==
Line 22: Line 14:
You can access its web interface from the sudo network: http://192.168.42.12/printer/main.html
You can access its web interface from the sudo network: http://192.168.42.12/printer/main.html


The user is "user" and its password is "sudoroom" - the admin password is kept by Yar<br />
The default user is "admin" and its password is "access".<br />


Original listserv announcement: http://lists.sudoroom.org/pipermail/sudo-sys/2013-December/000144.html
Original listserv announcement: http://lists.sudoroom.org/pipermail/sudo-sys/2013-December/000144.html
Line 83: Line 75:
=== Fixing the settings ===
=== Fixing the settings ===


First, re-enable the wifi interface:
Tell wifi to use sudomesh:
* http://169.254.32.12/bio/multiif.html
** Auto Switching ( Enable Both Interfaces )
 
The printer will restart. Then tell it to use sudomesh:
* http://169.254.32.12/bio/wlan.html
* http://169.254.32.12/bio/wlan.html
** Wireless Network Name (SSID): sudomesh
** Wireless Network Name (SSID): sudomesh


Then change the TCP/IP settings for wifi:
Then change the wifi TCP/IP settings:
* http://169.254.32.12/bio/tcpip2002.html?interface=2
* http://169.254.32.12/bio/tcpip2002.html?interface=2
** IP Address: 192.168.42.12
** IP Address: 192.168.42.12
** Gateway: 192.168.42.1
** Gateway: 192.168.42.1


The page won't load after this, but you can probably reach it normally by wifi.
Then make it use the wifi instead of ethernet:
* http://169.254.32.12/bio/multiif.html
** Auto Switching ( Enable Both Interfaces )
 
The printer will restart and the page won't reload. But now wifi should work. For some reason you can't have wifi + ethernet at the same time.

Navigation menu