Difference between revisions of "Brother HL-2270DW"

526 bytes added ,  15:44, 3 July 2015
(→‎Network Fail: buttons in bold)
Line 76: Line 76:
  sudo ip addr add 169.254.32.11/16 broadcast 169.254.32.255 dev eth0
  sudo ip addr add 169.254.32.11/16 broadcast 169.254.32.255 dev eth0


Then you can visit the [http://169.254.32.12/printer/main.html settings page] in your browser and change it back to something reasonable.
Then visit the [http://169.254.32.12/printer/main.html settings page] in your browser. The default auth is:
 
Username: admin
Password: access
 
=== Fixing the settings ===
 
First, re-enable the wifi interface:
* http://169.254.32.12/bio/multiif.html
** Auto Switching ( Enable Both Interfaces )
 
The printer will restart. Then tell it to use sudomesh:
* http://169.254.32.12/bio/wlan.html
** Wireless Network Name (SSID): sudomesh
 
Then change the TCP/IP settings for wifi:
* http://169.254.32.12/bio/tcpip2002.html?interface=2
** IP Address: 192.168.42.12
** Gateway: 192.168.42.1
 
The page won't load after this, but you can probably reach it normally by wifi.