Brother HL-2270DW

From Sudo Room
Revision as of 13:52, 3 July 2015 by Yar (talk | contribs) (→‎Network Fail: buttons in bold)
Jump to navigation Jump to search

It's a networked printer. Most operating systems will find it automatically if you're connected to any of these wifi networks:

  • sudomesh
  • sudoroom
  • sudoroom24g2
  • sudoroom2.4ghz
  • sudoroom5ghz
  • basement
  • Omni Ballroom

If you have trouble over the network, you can also connect by USB.

Details

Model: Brother HL-2270DW
Model website: http://www.brother-usa.com/Printer/ModelDetail/1/HL2270DW/
user guide
network user's guide
Features: B&W laser duplex wifi
wifi mac address: 00:22:58:18:DD:FD
ethernet mac address: 00:1B:A9:56:22:ED

Configured to connect to the SSID "sudomesh" with static IP 192.168.42.12

You can access its web interface from the sudo network: http://192.168.42.12/printer/main.html

The user is "user" and its password is "sudoroom" - the admin password is kept by Yar

Original listserv announcement: http://lists.sudoroom.org/pipermail/sudo-sys/2013-December/000144.html

HELP! how do i stop it printing stuff nobody wants?

if you're printing from linux, try emptying your local print spool by typing lprm

also try the printer's web interface maybe

bare-metal linux instructions

  1. Install & run CUPS
    • On Ubuntu/Mint:
      • apt-get install cups
      • service start cups
    • On Debian:
      • apt-get install cups
      • /etc/init.d/cups start
    • On Arch Linux:
      • pacman -Syu cups
      • systemctl start cups
  2. You configure CUPS through the browser at: http://localhost:631/admin
  3. Click on Add Printer. It will ask you for your root password. This is very insecure but it's how some stupid Linux things work!
    • User Name: root
    • Password: your root password
  4. Under Other Network Printers, select: LPD/LPR Host or Printer and press continue
  5. Under Connection, enter this string: lpd://192.168.42.12/queue
  6. Choose a name, description & location you will remember, then press continue
  7. Under Make, select Brother. Press continue.
  8. Under Model, select: Brother HL-1250 Foomatic/hl1250 (recommended).
  9. Press Add Printer.
  10. Try printing a test page!

Getting More Toner

Bring the empty toner cartridge to Cartridge World and they will give you a full one for $50ish. They reuse the cartridges. They've always had plenty of this model in stock. If you know of a cheaper alternative please edit this wiki.

It's just down the road, 1.5 miles away. Directions

Make sure you bring just the cartridge and not the entire drum thing. Those are more expensive and breakable.

Duplex Mode

Duplex mode is when it prints on both sides of the page. You can turn this on/off at the web interface: http://192.168.42.12/user/prnset.html

In duplex mode, I advise printing just one copy at a time. If you try to print multiple copies in one job, it might collate them wrong. This just happened to me. I tried to print two copies, but each sheet had the same exact thing front & back. Very weird.

Network Fail

Sometimes the network settings get fucked up because someone factory reset it or something. You can print the current settings by pressing Go 3 times within 2 seconds. If it got factory reset, the IP address will probably be 169.254.32.12 so you can fix it by connecting your linux laptop directly by ethernet and then something like:

sudo ip link set eth0 up
sudo ip addr add 169.254.32.11/16 broadcast 169.254.32.255 dev eth0

Then you can visit the settings page in your browser and change it back to something reasonable.