Difference between revisions of "File:HolBeerEmbedded.jpg"

From Sudo Room
Jump to navigation Jump to search
(Hol showing off his electronically controlled Beer Making Keg at the Microcircuits Hack Night.)
 
 
Line 1: Line 1:
Hol showing off his electronically controlled Beer Making Keg at the Microcircuits Hack Night.
Hol troubleshooting his electronically controlled mash keggle at the Microcircuits Hack Night.  DS18B20 sensors and a sainsmart 4x relay board extend the reach of the vanilla-flavored Arduino Duemilanove.  Temperature is controlled to within 0.5F and plotted in processing.  This is a bang'bang type controller, switching an AC pump and a 1000W resistive heating element on at (Tset - 0.5F) and off at (Tset + 0.5F).  Upon looking at the temperature curve from room temperature up to 100 degrees, it appears 1000W is not enough power input to command the system.  A second 1000W element will be added prior to the first brew.

Latest revision as of 11:05, 19 June 2013

Hol troubleshooting his electronically controlled mash keggle at the Microcircuits Hack Night. DS18B20 sensors and a sainsmart 4x relay board extend the reach of the vanilla-flavored Arduino Duemilanove. Temperature is controlled to within 0.5F and plotted in processing. This is a bang'bang type controller, switching an AC pump and a 1000W resistive heating element on at (Tset - 0.5F) and off at (Tset + 0.5F). Upon looking at the temperature curve from room temperature up to 100 degrees, it appears 1000W is not enough power input to command the system. A second 1000W element will be added prior to the first brew.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:39, 10 April 2013Thumbnail for version as of 12:39, 10 April 20131,440 × 1,440 (593 KB)Romyilano (talk | contribs)Hol showing off his electronically controlled Beer Making Keg at the Microcircuits Hack Night.

The following page uses this file:

Metadata