Low bandwidth disaster recovery mesh

From Sudo Room
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

software implementation of data over radio using USRP: (missing python scripts can be found on archive.org)

http://www.wu.ece.ufl.edu/projects/wirelessVideo/project/GNU_Radio_USRP/

transmitting hardware (soundcard Left and Right for I/Q out to this thing)

http://www.na0tc.org/Homebrewing%20a%20HF%20Software%20Defined%20Radio_Final_pdf.pdf

actual transmitter schematic:

http://yu1lm.qrpradio.com/HAM%20HF%20SDR%20TRANSMITTER%20YU1LM.pdf

http://yu1lm.qrpradio.com/FINAL%20HF%20SDR%20RECEIVERS%20TRANSMITTER%20YU1LM.pdf

programmable frequency generator:

https://www.sparkfun.com/products/9089

high frequency capable 4066 chip from mouser for above transmitter:

http://www.mouser.com/ProductDetail/NXP-Semiconductors/74LVC4066PW118/?qs=sGAEpiMZZMvjbjwkTuU2aWr3jA9LyhiebMD5MB9f6DQ%3d

that chip could be used in the same schematic from my previous link by yu1lm to be able to transmit at higher frequencies, probably up to about 200MHz

Retrieved from "https://sudoroom.org/mediawiki/index.php?title=Low_bandwidth_disaster_recovery_mesh&oldid=4196"