Mesh/Blog

From Sudo Room
Jump to navigation Jump to search

Deployed our first node!

Sudo Mesh's first mesh node!

Today we finished installing our first backbone node! It's running Sudo Mesh v0.1 Snow Crash, and will soon be linking up with two neighboring hacker houses. :-)

Here's Juul's reportback:

Pete and myself installed a Nanostation M5 on a 20 foot aluminum flagpole in West Oakland. The node is about 14 feet above the roof of a two-story building. The total cost of this install ran to about $145 including all materials.

Bill of Materials:

  • One Nanostation M5 loco
  • One 4 foot wood beam of 3.5" by 3.5"
  • Three 5" by 1/4" bolts
  • Three 5/8" washers for bolts (optional)
  • Three 1/2" washers for bolts (optional)
  • Two 5" hose clamps
  • 30+ feet of outdoor shielded ethernet cable
  • Two shielded/groundable ethernet plugs
  • A bunch of zip ties

The optional washers make it easier to tighten and untighten the bolts (otherwise they dig into the wood).

Material sources:

  • Nanostation from Amazon
  • Flag pole from Harbor Freight
  • Everything else from Home Depot

--Tunabananas (talk) 21:21, 31 December 2013 (PST)

hello world!

hello world!

it's been nearly a year since we first started meeting - our tiny group. so much learning, so much progress!

we've launched the peoplesopen.net! && meshthepla.net!

check out our code - namely forks of openwrt running batman-adv for routing and incorporating wlan-slovenia's tunneldigger for secure vpn connections, as well as an admin interface written in lua.

--Tunabananas (talk) 06:54, 28 December 2013 (PST)