Difference between revisions of "Mesh/Flashing extender nodes"

Line 4: Line 4:


{| class="wikitable"
{| class="wikitable"
! Name !! Model No. !! OpenWRT Doc !! Firmware Image
! Name !! Notes !! OpenWRT Doc !! Firmware Image
|-
|-
| Ubiquiti Nanostation M5 || NSM5 || [https://wiki.openwrt.org/toh/ubiquiti/nanostationm5 OpenWRT Docs] || firmware: [https://builds.sudomesh.org/builds/chaos_calmer/ar71xx.extender-node/openwrt-ar71xx-generic-ubnt-nano-m-squashfs-factory.bin pre 2015] or [https://builds.sudomesh.org/builds/chaos_calmer/ar71xx.extender-node/openwrt-ar71xx-generic-ubnt-nano-m-xw-squashfs-factory.bin 2015-2016]
| Ubiquiti Nanostation M2 and M5 || Newer models need AirOS downgrade before flash! || [https://wiki.openwrt.org/toh/ubiquiti/nanostationm5 OpenWRT Docs] || firmware: [https://builds.sudomesh.org/builds/chaos_calmer/ar71xx.extender-node/openwrt-ar71xx-generic-ubnt-nano-m-squashfs-factory.bin pre 2015] or [https://builds.sudomesh.org/builds/chaos_calmer/ar71xx.extender-node/openwrt-ar71xx-generic-ubnt-nano-m-xw-squashfs-factory.bin 2015-2016]
|-
|-
| Ubiquiti Nanostation M2 || NSM2 || [https://wiki.openwrt.org/toh/ubiquiti/nanostationm2 OpenWRT Docs] || [https://builds.sudomesh.org/builds/chaos_calmer/ar71xx.extender-node/openwrt-ar71xx-generic-om2p-squashfs-factory.bin firmware image]
| Ubiquiti Picostation 2 || Previous generation 802.11g (not the same as M2) || [https://wiki.openwrt.org/toh/ubiquiti/picostation2 OpenWRT Docs] || [https://builds.sudomesh.org/builds/chaos_calmer/ath25.extender-node/openwrt-ath25-ubnt2-pico2-squashfs.bin firmware image]
|-
|-
| Ubiquiti Picostation 2 || || [https://wiki.openwrt.org/toh/ubiquiti/picostation2 OpenWRT Docs] || [https://builds.sudomesh.org/builds/chaos_calmer/ath25.extender-node/openwrt-ath25-ubnt2-pico2-squashfs.bin firmware image]
| Ubiquiti Picostation M2 || || [https://wiki.openwrt.org/toh/ubiquiti/picostationm2 OpenWRT Docs] || [https://builds.sudomesh.org/builds/chaos_calmer/ar71xx.extender-node/openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-factory.bin firmware image]
|-
|-
| Ubiquiti Picostation M2 || || [https://wiki.openwrt.org/toh/ubiquiti/picostationm2 OpenWRT Docs] ||  
| Ubiquiti Nanobeam M2 and M5 || NBE‑M2‑13 and NBE‑M5‑16 work but some (earlier?) NBE‑M5‑19 have ethernet port issues || [https://wiki.openwrt.org/toh/ubiquiti/nanobeam OpenWRT Docs] || [https://builds.sudomesh.org/builds/chaos_calmer/ar71xx.extender-node/openwrt-ar71xx-generic-ubnt-nano-m-xw-squashfs-factory.bin 2015-2016]
|-
|-
| Ubiquiti Nanobeam M2 and M5 || || [https://wiki.openwrt.org/toh/ubiquiti/nanobeam OpenWRT Docs] ||
| Ubiquiti Nanobridge M2 and M5 || || Same as pre-2015 Nanostation M || [https://builds.sudomesh.org/builds/chaos_calmer/ar71xx.extender-node/openwrt-ar71xx-generic-ubnt-nano-m-squashfs-factory.bin firmware image]
|-
|-
| Ubiquiti Bullet M2 and M5 || || [https://wiki.openwrt.org/toh/ubiquiti/bullet OpenWRT Docs] ||  
| Ubiquiti Bullet M2 and M5 || || [https://wiki.openwrt.org/toh/ubiquiti/bullet OpenWRT Docs] || [https://builds.sudomesh.org/builds/chaos_calmer/ar71xx.extender-node/openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-factory.bin firmware image]
|}
|}
Note: Basically any Ubiquiti Airmax device supported by OpenWRT Chaos Calmer should work but these are the ones we've tested. In fact it's likely that any single-radio router supported by OpenWRT will work as an extender node. Please edit this page if you test some!


== Flash the Extender Node ==
== Flash the Extender Node ==