Difference between revisions of "Mesh/Flashing extender nodes"

Line 63: Line 63:
When booting with the reset button held down on a Ubiquity NSM5, the following output is displayed.
When booting with the reset button held down on a Ubiquity NSM5, the following output is displayed.


   U-Boot 1.1.4-s958 (Jun 10 2015 - 10:56:20)                                                                                      
   U-Boot 1.1.4-s958 (Jun 10 2015 - 10:56:20)
    
    
   DRAM:  64 MB                                                                                                                    
   DRAM:  64 MB
   Flash:  8 MB (0xc2, 0x20, 0x17)                                                                                                
   Flash:  8 MB (0xc2, 0x20, 0x17)
   Net:  AR8236                                                                                                                  
   Net:  AR8236
   eth0, eth1                                                                                                                      
   eth0, eth1
   Board: Ubiquiti Networks AR9342 board (e855-22585.1122.0030)                                                                    
   Board: Ubiquiti Networks AR9342 board (e855-22585.1122.0030)
   Radio: 0777:e855                                                                                                                
   Radio: 0777:e855
   Reset: Normal                                                                                                                  
   Reset: Normal
   Hit any key to stop autoboot:  0                                                                                                
   Hit any key to stop autoboot:  0
   Setting default IP 192.168.1.20                                                                                                
   Setting default IP 192.168.1.20
   Starting TFTP server...                                                                                                        
   Starting TFTP server...
   Using eth0 (192.168.1.20), address: 0x81000000                                                                                  
   Using eth0 (192.168.1.20), address: 0x81000000
   Will reset device configuration (Reset button active after 10 seconds).                                                        
   Will reset device configuration (Reset button active after 10 seconds).
   Erasing sector 123..126                                                                                                        
   Erasing sector 123..126
    
    
   First 0x7b last 0x7e sector size 0x10000                                                                                        
   First 0x7b last 0x7e sector size 0x10000
   .... done
   .... done
   Waiting for connection: \                                                                                                      
   Waiting for connection: \
   Receiving file from 192.168.1.10:49763                                                                                          
   Receiving file from 192.168.1.10:49763
   Received 4325788 bytes                                                                                                          
   Received 4325788 bytes
   Firmware check failed! (1)
   Firmware check failed! (1)
==== TFTP with Official Firmware ====
You can download the official firmware image from Ubiquity - [https://www.ubnt.com/download/airmax-m/nanostationm/default/airos-xw-board-firmware-v564 airOS for XW board firmware v5.6.4]
Then you can start the TFTP server
  ar7240> urescue
  Setting default IP 192.168.1.20
  Starting TFTP server...
  Using eth0 (192.168.1.20), address: 0x81000000
  Waiting for connection: |
From your machine, configured as 192.168.1.10, use TFTP to upload the official image
  $ tftp 192.168.1.20
  tftp> put XW.v5.6.4.28924.160331.1238.bin
  Transfer timed out.
The file uploads, and as expected the image does not result in a firmware check error.
  Receiving file from 192.168.1.10:56564
  Received 7296551 bytes
  Firmware Version: XW.ar934x.v5.6.4.28924.160331.1238
The U-Boot version is now different
  U-Boot 1.1.4-s958 (Jun 10 2015 - 10:56:20)
 
  DRAM:  64 MB
  Flash:  8 MB (0xc2, 0x20, 0x17)
  Net:  AR8236
  eth0, eth1
  Board: Ubiquiti Networks AR9342 board (e855-22585.1122.0030)
  Radio: 0777:e855
  Reset: Normal
  Hit any key to stop autoboot:  0
  ## Booting image at 9f050000 ...
    Image Name:  MIPS Ubiquiti Linux-2.6.32.68
    Created:      2016-03-31  9:39:16 UTC
    Image Type:  MIPS Linux Kernel Image (lzma compressed)
    Data Size:    955842 Bytes = 933.4 kB
    Load Address: 80002000
    Entry Point:  80002000
    Verifying Checksum at 0x9f050040 ...OK
    Uncompressing Kernel Image ... OK
 
  Starting kernel ...
 
  Booting Atheros AR934x


=== USB to Serial Connection ===
=== USB to Serial Connection ===
128

edits