Difference between revisions of "Mesh/Flashing extender nodes"

Line 308: Line 308:
===== Drop into U-Boot Command Prompt =====
===== Drop into U-Boot Command Prompt =====


Press a key to during the boot process to make the [https://wiki.openwrt.org/doc/techref/bootloader/uboot U-Boot] bootloader to drop into a command line prompt.
Connect a USB to Serial adapter to the correct pins of the NSM5, as shown above. Unplug the Ethernet cable from the device, and then plug it back in to provide Power Over Ethernet once again, resulting in a reboot of the device.
 
During the boot process, press a key to during the boot process to make the [https://wiki.openwrt.org/doc/techref/bootloader/uboot U-Boot] bootloader to drop into a command line prompt.


   U-Boot 1.1.4-s958 (Jun 10 2015 - 10:56:20)
   U-Boot 1.1.4-s958 (Jun 10 2015 - 10:56:20)
128

edits