Difference between revisions of "Mesh/Inventory"

From Sudo Room
Jump to navigation Jump to search
(Adding ideas for the box of crappy routers that we have)
(stale)
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
See bottom of page for updated casual inventory assessments.
[[Category:Stale]]
'''This page has been marked as [[:Category:Stale|stale]], as it is outdated to the point of providing significant misinformation. Please update it before linking other pages here.'''


= Missing pieces =
'''As of June 2018, we just reorganized the mesh cage. A more recent and up-to-date inventory of our materials is underway, but will likely be hosted elsewhere. Link to follow.'''


This is stuff that is needed to complete gear we already have.
= current-gen nodes =


*12 europlug to U.S. plug adapters (ground not required)
== ready for outdoor mounting ==
:Needed for europlug PoE adapters
NOTE: UPDATE WITH NEW DONATIONS AS OF 10/2017
*7 dc power supplies in the range 10.5 to 24 volts (not sure what plug, but looks standard)
* 1x [[Nanobridge M5 (25 dB version)]]
:Needed for passive PoE injectors
* 3x [[Nanobridge M5 (22 dB version)]]
*10 PoE injectors. Either 24 or 12 volts.
* 3x [[Nanostation M5]]
* 1x [[Nanostation M2]]
* 2x [[Rocket M5]] and 2x 90 degree panel antenna (one antenna already on rooftop)


= Outdoor gear =
All of these are complete (with PoE).


== Meraki Sparky ==
== ready for indoor use ==


* PCBs only, no enclosures
* ~150x [[Western Digital MyNet]] N750s or N600s
* [[Mesh/Meraki Sparky Enclosure Design]]


== 2.4 ghz antennas ==
All of these are complete (with power supply).


*15 very high-gain omnis (used, untested)
== used gear ==
:Around 3 feet
:Have mounting brackets for rooftop vent pipes
:Connectors for Ubiquiti Bullets.
:Source: [[Mesh/Purchases#First_crowd-sourced_purchase|First crowdsourced purchase]].


*20 high gain omnis (used, untested)
* Some [[Bullet M2]]s and some [[Bullet M5]]s. Need to count.
:Around 1.5 feet
:No mounting brackets
:12 of them have connectors for Ubiquiti Bullets. The other 8 need male to male adapters.
:Source: [[Mesh/Purchases#First_crowd-sourced_purchase|First crowdsourced purchase]].


== 2.4 ghz routers ==
= previous-gen nodes =


*76 Ubiquiti Picostation 2 HP (used, power-on tested only)
== used gear ==
:802.11 b/g
:Includes factory omni antennas.
:All include PoE adapters, though many need power cables, a few are passive and need a power supply, a few have ungrounded PoE adapters with european plugs that need adapters.
:Can be mounted on something round with zip ties.
:Most include wall mounts for screwing into a flat surface.
:Source: [[Mesh/Purchases#First_crowd-sourced_purchase|First crowdsourced purchase]].


*29 Ubiquiti Bullet 2 HP (used, power-on tested only)
* Maybe ~15x [[Picostation 2HP]] ?
:802.11 b/g
* A bunch of [[Bullet 2HP]]  
:No built-in antennas.
:No mounting brackets.
:No PoE adapters included.
:Source: [[Mesh/Purchases#First_crowd-sourced_purchase|First crowdsourced purchase]].


== 5 ghz antennas ==
== incomplete gear ==


*~3 old directv satellite dishes
* More than 100x Meraki sparky (also known as Meraki outdoor)
** No cases, power supplies or antennas (u.fl connector)
** Needs special script for hardware watchdog.
** Flashing takes ~20 mins


== 5 ghz routers ==
= PoE adapters =


*1 Ubiquiti Nanobridge M5 25dbi (new, untested)
* ?
:802.11n
:[[Mesh/a x b : c notation|2 x 2 : 2]]
:Includes grounded PoE with remote reset.
:Source: Bought on ebay by [[User:Juul|Juul]] ([[User talk:Juul|talk]]).
:Total price: ? (around $110)


*1 Ubiquiti Nanostation M5 (new, untested)
= Cable =
:802.11n
:[[Mesh/a x b : c notation|2 x 2 : 2]]
:Includes grounded PoE.
:Source: Bought on ebay by [[User:tunabananas|tunabananas]].
:Total price: ? (around $110)


*1 Ubiquiti Rocket M5 (used, untested)
== Ethernet ==
:802.11n
* Maybe 1/4 roll of a 100 foot outdoor UV-protected shielded and grounded CAT6
:[[Mesh/a x b : c notation|2 x 2 : 2]]
* A bunch of indoor CAT5 and CAT5E
:Includes grounded PoE.
* Bunch of RJ45 connectors
:Source: Bought on craigslist by [[User:Juul|Juul]] ([[User talk:Juul|talk]])
* Bunch of grounded RJ45 connectors
:Total price: $34


*4 Ubiquiti Bullet M5 (used, tested)
= Antennas and pigtails =
:802.11n
:No antennas.
:All include grounded PoE with remote reset.
:[[Mesh/a x b : c notation|1 x 1 : 1]]
:Source: Bought on ebay by [[User:Juul|Juul]] ([[User talk:Juul|talk]]).
:Total price: $113


*1 Ubiquiti Nanostation M5 (used, power-on tested only)
We have a bunch of high-gain omnis, a bunch of dish (the grid type) antennas, and a few panel antennas. Most of these are N connectors. We need to go through them, check frequency and tag them with frequency.
:802.11n
:[[Mesh/a x b : c notation|2 x 2 : 2]]
:Needs PoE.
:Source: [[Mesh/Purchases#First_crowd-sourced_purchase|First crowdsourced purchase]].


*2 Ubiquiti Nanobridge M5 (used, power-on tested only)
We have a bunch of u.fl to male N pigtails.  
:802.11n
:Need PoE adapters.
:[[Mesh/a x b : c notation|2 x 2 : 2]]
:Source: [[Mesh/Purchases#First_crowd-sourced_purchase|First crowdsourced purchase]].


*3 Ubiquiti Airgrid M5 (used, untested)
We have a bunch of GPS antennas.
:<span style='color:red'>'''WARNING: Do not hook these up to a normal PoE supply.</span>
::The AirGrid M5 uses 5 vdc PoE. 5.25 vdc absolute max! Anything more will fry it!
:802.11n
:We need to make PoE adapters for these, as they are not easy to find.
:[[Mesh/a x b : c notation|1 x 1 : 1]]
:Source: [[Mesh/Purchases#First_crowd-sourced_purchase|First crowdsourced purchase]].


= Indoor gear =
= Tools for node-mounting =


== 2.4 ghz ==
== Big tools ==


*[http://wiki.openwrt.org/toh/netgear/wndr3300 Netgear WNDR3300]
* One foldable woodworking table (like [http://www.powertoolsdirect.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/b/l/black-and-decker-wm626-dual-height-tough-workmate_1.jpg this])
*[http://wiki.openwrt.org/toh/start#linksys Linksys WRT54G (x3)]
*[http://wiki.openwrt.org/toh/asus/rt-n10plus Asus RT-N10+ (x2)]
*[http://wiki.openwrt.org/oldwiki/OpenWrtDocs/Hardware/Meraki/Mini Meraki Mini]


*Ubiquiti Unifi indoor
== Hand tools ==
:802.11 b/g/n
:[[Mesh/a x b : c notation|2 x 2 : 2]]
:Source: [[Mesh/Purchases#First_crowd-sourced_purchase|First crowdsourced purchase]].


* One decent RJ45 crimper (blue handle) with somewhat worn out cutting blades
* 2x low quality RJ45 crimpers (green handle). Probably OK for crimping but not for cutting or stripping.
* A set of screwdrivers, wire cutter, tongs, and other basic hand tools.


==== Useless-Seeming Gear ====
== Power tools ==


A lot of the older gear (including the linksys wrt54 routers which we now have a big bin of) is starting to seem useless. However, we should keep in mind that they can still serve as wired routers and/or switches:
* Makita impact driver (battery powered)
* Makita drill (battery powered)
* Makita battery charger
* 3x Makita batteries


* In a couple instances, we've had sudoers report that their home network modem serves a 10.* home IP range, which conflicts with our mesh IP system. In these cases, we can send someone home with a  crappy router (wouldn't even likely need openwrt) which they could connect to their modem and put in between the modem and their mesh access point. The crappy router could serve a 192.168.1/24 range and do NAT translation which would allow the mesh node to operate.
== Testing ==


* A lot of our longer range gear (ubiquiti, etc.) only has one ethernet hub. That makes it less than ideal for folks who want to run their own services. If we use the crappy router as a proper wired router, we can add network attached devices to run services. This could include network-attached storage, raspberry pie/beaglebone black mini-servers/other server machines.
* Two ethernet cable testers (need batteries)


= non-OpenWRT compatible routers =
= Consumables for node-mounting =


= Tools =
TODO put stuff like mounting brackets, plumbers tape, screws, silicone, hose clamps, cable staples.


*~20' ladder
= Other stuff =
:At Adeline Livelabs. Owned by Shawn but we can borrow.
*~16' ladder
:At Adeline Livelabs. Owned by Shawn but we can borrow.
*Pickup truck
:At Hearth. Owned by Lilia, but we can borrow if we schedule.


= Needs fixing =
* 3x One Laptop Per Child XO Laptop (one power supply)
* Lots of other stuff that needs.


Please specify what it is assumed we'd need to repair this stuff.
= Less than useful stuff =


*ARCFlex Freestation 2
* A bunch of random indoor routers that don't support OpenWRT
:802.11 b/g/n 2.4 ghz
* A bunch of random indoor routers that do support modern OpenWRT but no two are alike
:Dual radio. One 2x2:2 and one 1x1:1.
* A great big stack of the original blue linksys routers. These only support old versions of OpenWRT.
:Includes grounded PoE.
:Source: Bought on ebay by [[User:Juul|Juul]] ([[User talk:Juul|talk]]).
:Price: $60
:What's broken: The OpenWRT build for this router has a bug (ssh/telnet not enabled on ethernet port). Just needs serial console access to enable ssh.
 
*3 Picostation 2 HPs
:The power LED doesn't come on when they are plugged in to PoE. They are also missing antennas and weather covers.
 
= Fubar =
 
Gear so broken we've given up on it, except possibly for parts.
 
= Inventory by ChrisJ 2013.08.01 =
* We need 42 "mouse ear" power cords (http://www.amazon.com/Cables-Unlimted-6-feet-Mickey-Mouse/dp/B000234TYI/ref=pd_cp_e_0)
* We should get another 20 POE devices + 20 more power cords - Ubiquiti POE-24 (http://goo.gl/ne7ekg)
* these units do not need power cords; lower cost - (http://tycononline.com/tp-poe-24-wp.html?___store=default&gclid=CPDJvLDU7rgCFc57QgodQxcAqA
 
The inventory:
* 42 x Pico Station 2, Antenna, 3 prong POE, no cords (marked with circle on box label)
* 8 x Pico Station 2, Antenna, 3 prong POE, incl cords (marked with check on box label)
* 7 x Pico Station 2, Antenna, UK POE (marked with "UK" on box label)
* 5 x Pico Station 2, Antenna, 12V POE, no wall warts (maked with "12V" on box label)
 
* 6 x Pico Station 2, Antenna, 3 prong POE, incl cords - being used by developers to load OpenWRT
 
* 13 x Ubiquiti Bullet M2-HP, unboxed
* 13 x Ubiquiti Bullet M2-HP,  in boxes
 
=Inventory of blue bin by Tunabananas 2014.05.28=
==Usable==
* 19 working picostations
* 21 mickey mouse cables
* 5 poe injectors
* 3 passive poe injectors
* 9 mounting disks
* 1 yagi directional antenna
* JTAG adaptor
 
==Broken==
* 5 broken picostations
 
==Unusable==
* 7 UK poe injectors
* 10 bullet antennae
* 15 Bullet 2HP

Latest revision as of 13:57, 10 June 2018

This page has been marked as stale, as it is outdated to the point of providing significant misinformation. Please update it before linking other pages here.

As of June 2018, we just reorganized the mesh cage. A more recent and up-to-date inventory of our materials is underway, but will likely be hosted elsewhere. Link to follow.

current-gen nodes

ready for outdoor mounting

NOTE: UPDATE WITH NEW DONATIONS AS OF 10/2017

All of these are complete (with PoE).

ready for indoor use

All of these are complete (with power supply).

used gear

previous-gen nodes

used gear

incomplete gear

  • More than 100x Meraki sparky (also known as Meraki outdoor)
    • No cases, power supplies or antennas (u.fl connector)
    • Needs special script for hardware watchdog.
    • Flashing takes ~20 mins

PoE adapters

  • ?

Cable

Ethernet

  • Maybe 1/4 roll of a 100 foot outdoor UV-protected shielded and grounded CAT6
  • A bunch of indoor CAT5 and CAT5E
  • Bunch of RJ45 connectors
  • Bunch of grounded RJ45 connectors

Antennas and pigtails

We have a bunch of high-gain omnis, a bunch of dish (the grid type) antennas, and a few panel antennas. Most of these are N connectors. We need to go through them, check frequency and tag them with frequency.

We have a bunch of u.fl to male N pigtails.

We have a bunch of GPS antennas.

Tools for node-mounting

Big tools

  • One foldable woodworking table (like this)

Hand tools

  • One decent RJ45 crimper (blue handle) with somewhat worn out cutting blades
  • 2x low quality RJ45 crimpers (green handle). Probably OK for crimping but not for cutting or stripping.
  • A set of screwdrivers, wire cutter, tongs, and other basic hand tools.

Power tools

  • Makita impact driver (battery powered)
  • Makita drill (battery powered)
  • Makita battery charger
  • 3x Makita batteries

Testing

  • Two ethernet cable testers (need batteries)

Consumables for node-mounting

TODO put stuff like mounting brackets, plumbers tape, screws, silicone, hose clamps, cable staples.

Other stuff

  • 3x One Laptop Per Child XO Laptop (one power supply)
  • Lots of other stuff that needs.

Less than useful stuff

  • A bunch of random indoor routers that don't support OpenWRT
  • A bunch of random indoor routers that do support modern OpenWRT but no two are alike
  • A great big stack of the original blue linksys routers. These only support old versions of OpenWRT.