ready for outdoor mounting
- 1x Nanobridge M5 (25 dB version)
- 3x Nanobridge M5 (22 dB version)
- 3x Nanostation M5
- 1x Nanostation M2
- 2x Rocket M5 and 2x 90 degree panel antenna (one antenna already on rooftop)
All of these are complete (with PoE).
ready for indoor use
- 5x Western Digital My Net N750
All of these are complete (with power supply).
- Some Bullet M2 and some Bullet M5. Need to count.
- Maybe ~15x Picostation 2 HP ?
- A bunch of Bullet 2 HP
- More than 100x Meraki sparky (also known as Meraki outdoor)
- No cases, power supplies or antennas (u.fl connector)
- Needs special script for hardware watchdog.
- Flashing takes ~20 mins
- Maybe 1/4 roll of a 100 foot outdoor UV-protected shielded and grounded CAT6
- A bunch of indoor CAT5 and CAT5E
- We should be receiving a bunch of indoor CAT6 in a few days
- Bunch of RJ45 connectors
- Bunch of grounded RJ45 connectors
Antennas and pigtails
We have a bunch of high-gain omnis, a bunch of dish (the grid type) antennas, and a few panel antennas. Most of these are N connectors. We need to go through them, check frequency and tag them with frequency.
We have a bunch of u.fl to male N pigtails.
We have a bunch of GPS antennas.
Tools for node-mounting
- One foldable woodworking table (like this)
- One decent RJ45 crimper (blue handle) with somewhat worn out cutting blades
- 2x low quality RJ45 crimpers (green handle). Probably OK for crimping but not for cutting or stripping.
- A set of screwdrivers, wire cutter, tongs, and other basic hand tools.
- Makita impact driver (battery powered)
- Makita drill (battery powered)
- Makita battery charger
- 3x Makita batteries
- Two ethernet cable testers (need batteries)
Consumables for node-mounting
TODO put stuff like mounting brackets, plumbers tape, screws, silicone, hose clamps, cable staples.
- 3x One Laptop Per Child XO Laptop (one power supply)
- Lots of other stuff that needs.
Less than useful stuff
- A bunch of random indoor routers that don't support OpenWRT
- A bunch of random indoor routers that do support modern OpenWRT but no two are alike
- A great big stack of the original blue linksys routers. These only support old versions of OpenWRT.