Mesh/Meraki Sparky Enclosure Design

From Sudo Room
Revision as of 00:36, 10 January 2014 by Chrisjx (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

See Also: Mesh/Inventory

notes about an enclosure for the Maraki Sparky

first pass

A sketchup drawing. There is a ruby plugin that provides an option to export a sketchup drawing as an STL file.

Maraki Sparky box-1.jpg

The idea is for an enclosure that has a slot on the inner sides into which the Meraki Sparky PCB can slide. Then there might be a single screw that can be inserted from the bottom in order to keep the PCB from sliding out. Next design should have:

  • the standoff extending from the top, but short enough to clear the PCB components
  • the slide-in slots should be near the bottom of the box
  • the opening should have a curved front to accommodate the angled ethernet/power connections
  • the back should have a mounting hole for the antenna


Find the sketchup drawing, in progress, at: https://github.com/TinajaLabs/Meraki_Sparky-box