Revision as of 20:14, 16 January 2018

Mounting Rooftop Nodes

Pre-flashed NanoBridge and/or Nanostation, plus POE injector
Pre-flashed home node(s) as appropriate, plus power supplies and ethernet cables

Drill and appropriate bits
- Standard
- Green concave(?) for loosening/tightening hose clamp screws
Impact drill & 10" bit (for drilling through walls)
EZ Crimper (blue handles)
Needle-nose plyers
Wrench
Wirecutters
Hammer

@@ Line 2: / Line 2: @@
 ==Node Mount Inventory Checklist==
-* Nodes! Pre-flashed NanoBridge and/or Nanostation, plus POE injector
+=== Nodes ===
+* Pre-flashed NanoBridge and/or Nanostation, plus POE injector
+* Pre-flashed home node(s) as appropriate, plus power supplies and ethernet cables
+=== Tools ===
 * Drill and appropriate bits
 ** Standard
 ** Green concave(?) for loosening/tightening hose clamp screws
-* Outdoor shielded ethernet cable
+* Impact drill & 10" bit (for drilling through walls)
-* Shielded RJ45s
+* EZ Crimper (blue handles)
-* EZ Crimper
 * Needle-nose plyers
-* Home node(s) as appropriate
+* Wrench
-* Hose clamps
+* Wirecutters
+* Hammer
+=== Things to Attach Things to Other Things ===
+* Hose clamps of various sizes
 * Small and industrial-strength zip ties
-* Wrench
+* J-pole, flagpole or pipe for extending height of node
+* Large cable ties
+* Nails & screws
+* Nuts & bolts
-= More Resources =
+=== Cable & Accessories ===
-[[Rooftop Dish Antenna Mount]]
+* Outdoor shielded ethernet cable
+* Box of indoor ethernet cable
+* Shielded & grounded RJ45s
+* Regular RJ45s
+* RJ45 boots