Difference between revisions of "Mesh/WalkThrough"

Mesh/WalkThrough (view source)

Revision as of 23:42, 3 May 2016

1 byte removed , 23:42, 3 May 2016

no edit summary

Redconfetti

128

edits

Revision as of 23:39, 3 May 2016 (view source) Redconfetti (talk \| contribs) (adding additional post-setup link to home node info) ← Older edit		Revision as of 23:42, 3 May 2016 (view source) Redconfetti (talk \| contribs) Newer edit →
Line 1:		Line 1:
	This a walkthrough for flashing a node with the sudomesh firmware and then configuring it with makenode. At the end of the walkthrough, you'll be able to plug in your router and join the mesh. The walkthrough assumes you're using a linux-ish (OSX should mostly work) OS and that you have [https://help.ubuntu.com/community/UsingTheTerminal basic knowledge of the terminal]. The basic idea of getting a node (router) on the mesh consists of flashing (copying files to [https://en.wikipedia.org/wiki/Flash_memory flash memory]) an operating system to the node and then using a software configurator finish setup .		This a walkthrough for flashing a node with the sudomesh firmware and then configuring it with makenode. At the end of the walkthrough, you'll be able to plug in your router and join the mesh. The walkthrough assumes you're using a linux-ish (OSX should mostly work) OS and that you have [https://help.ubuntu.com/community/UsingTheTerminal basic knowledge of the terminal]. The basic idea of getting a node (router) on the mesh consists of flashing (copying files to [https://en.wikipedia.org/wiki/Flash_memory flash memory]) an operating system to the node and then using a software configurator finish setup.

	If you do not want to use a per-compiled OpenWRT image, you can build your own from scratch using this how to: [[Mesh/Build An OpenWRT Image]]		If you do not want to use a per-compiled OpenWRT image, you can build your own from scratch using this how to: [[Mesh/Build An OpenWRT Image]]