128
edits
Difference between revisions of "Mesh/WalkThrough"
m
→Flash your Router with OpenWRT
Redconfetti (talk | contribs) |
Redconfetti (talk | contribs) |
||
| Line 62: | Line 62: | ||
== Flash your Router with OpenWRT == | == Flash your Router with OpenWRT == | ||
There are different techniques for flashing each of the routers. Use the links above to the | There are different techniques for flashing each of the routers. Use the links above to the OpenWRT wiki and follow the instructions there to flash the router with the firmware you've downloaded. | ||
For example, if you have a Western Digital MyNet N600, follow these instructions: | For example, if you have a Western Digital MyNet N600, follow these instructions: | ||
| Line 73: | Line 73: | ||
* Once the front blue is flashing, you can let go of the pin. | * Once the front blue is flashing, you can let go of the pin. | ||
On your laptop | On your laptop edit your network settings to reflect the following: | ||
* Network Configuration Method: Manual | |||
* IP Address: 192.168.1.10 | |||
* Subnet Mask: 255.255.255.0 | |||
* Gateway: 0.0.0.0 | |||
See [https://sudoroom.org/wiki/Mesh/Network%20Configuration%20for%20Linux Network Configuration for Linux] | |||
* Click on the network icon on the top right of the toolbar. | * Click on the network icon on the top right of the toolbar. | ||