Difference between revisions of "Mesh/WalkThrough"

80 bytes added ,  20:59, 4 May 2016
Line 84: Line 84:
In your web browser:
In your web browser:


* Go to "192.168.1.1"
* Go to [http://192.168.1.1 http://192.168.1.1]
* Click Browse and select the firmware you downloaded
* Click 'Browse' and select the firmware file you downloaded
* Click Install
* Click Install
** Sometimes the interface will hang. You should get a page with a countdown of 120+ seconds. If this does not occur, reboot the router with the pin reset button depressed (as noted above), and try again.
 
Note: Sometimes the firmware upload will not complete. After you click on 'Install' You should get a page with a countdown of 120+ seconds. If this does not occur, reboot the router with the pin reset button depressed (as noted above), and try again.


= Configuring Your OpenWRT Router to Work on the Sudomesh Network =
= Configuring Your OpenWRT Router to Work on the Sudomesh Network =
128

edits