Difference between revisions of "Rooftop Dish Antenna Mount"

From Sudo Room
Jump to navigation Jump to search
Line 7: Line 7:
  
 
== Parts ==
 
== Parts ==
 +
 +
# 1 x 2x4 board x 4'
 +
# 1 x 2x2 board x 4'
 +
# 1 x 4'x4' 1/2" plywood
 +
# 16 x #10 x 1.5" wood screw, philips bevel head
 +
# 20 x #10 x 2.0" wood screw, philips bevel head
 +
# 20' braded cable
 +
# 2 x wire rope clamp w/ thimble
 +
# 1 x 24" x 2' conduit
 +
# 2 x 2"x4" U-bolts
 +
 +
Paint and/or water sealer to apply to the wood.
  
 
== Diagrams ==
 
== Diagrams ==

Revision as of 23:23, 22 November 2014

See Also:

notes about how to mount a dish antenna on a basic sloped roof house.

Parts

  1. 1 x 2x4 board x 4'
  2. 1 x 2x2 board x 4'
  3. 1 x 4'x4' 1/2" plywood
  4. 16 x #10 x 1.5" wood screw, philips bevel head
  5. 20 x #10 x 2.0" wood screw, philips bevel head
  6. 20' braded cable
  7. 2 x wire rope clamp w/ thimble
  8. 1 x 24" x 2' conduit
  9. 2 x 2"x4" U-bolts

Paint and/or water sealer to apply to the wood.

Diagrams

Diagrams for a sloped-roof mounting platform for a dish antenna. Back view.
Diagrams for a sloped-roof mounting platform for a dish antenna. Front view.
Diagrams for a sloped-roof mounting platform for a dish antenna. Side view.