Open main menu
← Older edit
Newer edit →
Mesh/Flashing extender nodes
Revision as of 20:08, 6 May 2016
362 bytes added
20:08, 6 May 2016
→Serial Communications Program
Reboot the device, and it will let you drop into a command line. You will then have to figure out how to enable the network from the boot loader (Uboot or Redboot) and transfer the firmware to the device to flash it.
==== Interupting Boot ====
You'll need to make sure to press a key before it boots the default image.
U-Boot 1.1.4-s958 (Jun 10 2015 - 10:56:20)
DRAM: 64 MB
Flash: 8 MB (0xc2, 0x20, 0x17)
Board: Ubiquiti Networks AR9342 board (e855-22585.1122.0030)
Hit any key to stop autoboot: 0
Retrieved from "