Difference between revisions of "Mesh/WalkThrough"

Jump to navigation Jump to search
224 bytes added ,  14:48, 9 December 2018
Add flag to Makenode section warning away Autoconf users.
(Add flag to Makenode section warning away Autoconf users.)
Line 136: Line 136:


== Makenode (v.0.2.3 and earlier) ==
== Makenode (v.0.2.3 and earlier) ==
'''''Note: If you installed autoconfiguring [https://github.com/sudomesh/sudowrt-firmware/releases/tag/0.3.0 release 0.3.0] for myNet N600 routers, you do not need to use makenode. See the autoconf instructions above.'''''
After you have successfully flashed your router with OpenWRT, you will need to use [https://github.com/sudomesh/makenode makenode] to complete the setup. makenode registers your node on the peoplesopen network, resulting in the assignment of a 64 IPv4 address subnet to your node, in addition to applying basic configuration.
After you have successfully flashed your router with OpenWRT, you will need to use [https://github.com/sudomesh/makenode makenode] to complete the setup. makenode registers your node on the peoplesopen network, resulting in the assignment of a 64 IPv4 address subnet to your node, in addition to applying basic configuration.


Navigation menu