Subiir 8

From Sudo Room
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Summary

  • Stout!
  • Yield: Aiming for 7gls in a 5gl bucket and 2gl bucket, food safe. (added 1 gl later and poured straight from vessel #1 to 2 gl fermenter (so plus plus stuffs), yield around ~9 gl)
  • Gravity: 1.035 pre-fermentation.
  • Dates: Brewed November 30th, To be bottled , To be had

Ingredients

Grains

  • Body: Pacific Northwest Pale Ale Malt. 8 lbs.
  • Specialty malts: 5lbs total
    • 2.5 lbs rye malt
    • .9 lbs br chocolate
    • .65 lbs br roasted barley
    • .65 lbs caramwich
    • .3 lbs aromatic

Hops

  • 1.9/2 oz E. Kent Golding, 7.2% Alpha acid (bittering, added start of boil)
  • 1.8/2 oz Styrian Golding, 4.0% alpha acid (aroma, added 58 minutes into boil)

Yeast

  • Wlp002, English ale yeast
  • Re-invigorated using a malt-starter and a magnet spinner.

Water

  • 8 gls starting
  • Added 1 gl after mash before boil.
    • We ended up with ~0.5/0.7 gl less than we wanted, so next time use ~9.5 gls total.

Process

  • Get the yeast growing on the magnet spinner!
  • Measure out grains and water, bring into mashing vessel #1 (turkey frier) and #2 (stockpot)
  • MASHING:
    • Bring both vessels to 68 degrees celcius.
    • Keep temperature stable for 60 minutes.
    • Lift grainbag from vessel #1 ontop of it, pour mash (incl. grains) from vessel #2 through the grainbag.
    • Let it drip and squeeze it when cold enough
      • Note to self: For efficiency, let the drip happen over some bucket and start boil immediately. Just add mash squeezed out of grainbag into vessel #1 during boil.
  • BOIL:
    • 60 minutes total
    • Add bittering hops at start
    • Add aroma hops 58 minutes into boil.
      • We forgot to remove hops after 60 minutes of boil! > might be too bitter. we will see.
  • PREPARING FERMENTERS
    • Sanitize during boil.
    • Just before boil, add yeast to fermenters
      • We forgot to add yeast this time, and had to pitch it after tapping in the mash.
    • Place some iodyne solution next to vessel #1.
  • TAPPING
    • Tap into fermenters, with the counter-flow chiller on.

Inspiration

Evaluation

PROCESS

  • Remember to pitch yeast into fermenters before tapping
  • Remember to remove hops at end of boil
  • Remember to get yeast going as first thing in the morning.