Difference between revisions of "TAZ"

From Sudo Room
Jump to navigation Jump to search
(add links to firmware (can't figure out how to upload the files to the wiki))
Line 16: Line 16:


=== SetUp ===
=== SetUp ===
=== Firmware ===
if you screw up the firmware with a weird upload or whatever, here's the factory hex file (which can be flashed using cura-lulzbot)
https://devel.lulzbot.com/TAZ/3.1/software/2014Q2/firmware/marlin/Marlin_taz3.1.cpp.hex
source:
http://download.lulzbot.com/TAZ/3.1/software/current/firmware/marlin_taz/marlin_taz.tar.bz2


=== 3D Models ===
=== 3D Models ===

Revision as of 00:56, 22 February 2018

Taz first print 2.jpg

Sudoroom has a TAZ3 3D printer. We won it in the LulzBot 2014 printer giveaway! It can print from an SD card, with many materials:

  • PLA
  • ABS
  • Wood
  • Nylon

We are still getting familiar with this machine, but very excited to hack on it!

Manual

SetUp

Firmware

if you screw up the firmware with a weird upload or whatever, here's the factory hex file (which can be flashed using cura-lulzbot) https://devel.lulzbot.com/TAZ/3.1/software/2014Q2/firmware/marlin/Marlin_taz3.1.cpp.hex

source: http://download.lulzbot.com/TAZ/3.1/software/current/firmware/marlin_taz/marlin_taz.tar.bz2

3D Models

Taz Slic3r Profiles

Links