Difference between revisions of "TAZ"

From Sudo Room
Jump to navigation Jump to search
m
Line 1: Line 1:
[[File:Taz_first_print_2.jpg|right|frameless|460px]]
[[File:Taz_first_print_2.jpg|right|frameless|460px]]


Sudoroom has a [https://www.lulzbot.com/products/lulzbot-taz-3-3d-printer TAZ3] 3D printer. We won it in the [https://www.lulzbot.com/ LulzBot] 2014 printer giveaway! It can print with many materials:
Sudoroom has a [https://www.lulzbot.com/products/lulzbot-taz-3-3d-printer TAZ3] 3D printer. We won it in the [https://www.lulzbot.com/ LulzBot] 2014 printer giveaway! It can print from an SD card, with many materials:


* PLA
* PLA
Line 9: Line 9:


We are still getting familiar with this machine, but very excited to hack on it!
We are still getting familiar with this machine, but very excited to hack on it!
=== Note ===
cura-lulzbot slicer is installed on the computer there, and "sudoroom white
ABS" filament is defined and should work.  Pronterface (red icon) is the
program to use to drive the printer and run the gcode generated by cura.
Don't do the SD card thing, it won't work and is terrible.


=== Manual ===
=== Manual ===
Line 28: Line 21:
https://github.com/sudoroom/taz3d
https://github.com/sudoroom/taz3d


if you screw up the firmware with a weird upload or whatever, here's the factory hex file (which can be flashed using cura-lulzbot)
Below are links to the original firmware from the manufacturer's site, AKA the first commits in the above GitHub repo.
here's the factory hex file (which can be flashed using cura-lulzbot)
https://devel.lulzbot.com/TAZ/3.1/software/2014Q2/firmware/marlin/Marlin_taz3.1.cpp.hex
https://devel.lulzbot.com/TAZ/3.1/software/2014Q2/firmware/marlin/Marlin_taz3.1.cpp.hex


source:
factory firmware source code (Marlin with configuration tweaks):
http://download.lulzbot.com/TAZ/3.1/software/current/firmware/marlin_taz/marlin_taz.tar.bz2
http://download.lulzbot.com/TAZ/3.1/software/current/firmware/marlin_taz/marlin_taz.tar.bz2



Revision as of 18:26, 27 February 2018

Taz first print 2.jpg

Sudoroom has a TAZ3 3D printer. We won it in the LulzBot 2014 printer giveaway! It can print from an SD card, with many materials:

  • PLA
  • ABS
  • Wood
  • Nylon

We are still getting familiar with this machine, but very excited to hack on it!

Manual

SetUp

Firmware

here's a backup of the factory firmware .hex file and "source code" for our TAZ 3: https://github.com/sudoroom/taz3d

Below are links to the original firmware from the manufacturer's site, AKA the first commits in the above GitHub repo. here's the factory hex file (which can be flashed using cura-lulzbot) https://devel.lulzbot.com/TAZ/3.1/software/2014Q2/firmware/marlin/Marlin_taz3.1.cpp.hex

factory firmware source code (Marlin with configuration tweaks): http://download.lulzbot.com/TAZ/3.1/software/current/firmware/marlin_taz/marlin_taz.tar.bz2

3D Models

Taz Slic3r Profiles

Links