Difference between revisions of "TAZ"

TAZ (view source)

Revision as of 18:26, 27 February 2018

165 bytes removed , 18:26, 27 February 2018

no edit summary

Jerkey

Bureaucrats, Interface administrators, Administrators, Widget editors

289

edits

@@ Line 1: / Line 1: @@
 [[File:Taz_first_print_2.jpg|right|frameless|460px]]
-Sudoroom has a [https://www.lulzbot.com/products/lulzbot-taz-3-3d-printer TAZ3] 3D printer. We won it in the [https://www.lulzbot.com/ LulzBot] 2014 printer giveaway! It can print with many materials:
+Sudoroom has a [https://www.lulzbot.com/products/lulzbot-taz-3-3d-printer TAZ3] 3D printer. We won it in the [https://www.lulzbot.com/ LulzBot] 2014 printer giveaway! It can print from an SD card, with many materials:
 * PLA
@@ Line 9: / Line 9: @@
 We are still getting familiar with this machine, but very excited to hack on it!
-=== Note ===
-cura-lulzbot slicer is installed on the computer there, and "sudoroom white
-ABS" filament is defined and should work.  Pronterface (red icon) is the
-program to use to drive the printer and run the gcode generated by cura.
-Don't do the SD card thing, it won't work and is terrible.
 === Manual ===
@@ Line 28: / Line 21: @@
 https://github.com/sudoroom/taz3d
-if you screw up the firmware with a weird upload or whatever, here's the factory hex file (which can be flashed using cura-lulzbot)
+Below are links to the original firmware from the manufacturer's site, AKA the first commits in the above GitHub repo.
+here's the factory hex file (which can be flashed using cura-lulzbot)
 https://devel.lulzbot.com/TAZ/3.1/software/2014Q2/firmware/marlin/Marlin_taz3.1.cpp.hex
-source:
+factory firmware source code (Marlin with configuration tweaks):
 http://download.lulzbot.com/TAZ/3.1/software/current/firmware/marlin_taz/marlin_taz.tar.bz2