TAZ

From Sudo Room
Revision as of 01:12, 22 February 2018 by Jerkey (talk | contribs)
Jump to navigation Jump to search
Taz first print 2.jpg

Sudoroom has a TAZ3 3D printer. We won it in the LulzBot 2014 printer giveaway! It can print from an SD card, with many materials:

  • PLA
  • ABS
  • Wood
  • Nylon

We are still getting familiar with this machine, but very excited to hack on it!

Manual

SetUp

Firmware

here's a backup of the factory firmware .hex file and "source code" for our TAZ 3: https://github.com/sudoroom/taz3d

if you screw up the firmware with a weird upload or whatever, here's the factory hex file (which can be flashed using cura-lulzbot) https://devel.lulzbot.com/TAZ/3.1/software/2014Q2/firmware/marlin/Marlin_taz3.1.cpp.hex

source: http://download.lulzbot.com/TAZ/3.1/software/current/firmware/marlin_taz/marlin_taz.tar.bz2

3D Models

Taz Slic3r Profiles

Links