Difference between revisions of "Type A Machine"

From Sudo Room
Jump to navigation Jump to search
 
(32 intermediate revisions by 6 users not shown)
Line 1: Line 1:
=3D printer=
[[File:Type-A-Machines-series-1-3d-printer.png|thumb|left]]
[[File:Spool Chaos.jpg|right|frameless|460px]]
''This is about a particular printer. There's a separate page about [[3D_Modeling|creating or acquiring 3D models]].''
== Current Status ==


Made by http://typeamachines.com/ in San Francisco
''It's on the 3D printing desk and works perfectly!''


Anyone can use it, just come by and get a quick tutorial. There are a few instruction notes on the printer's table.
== Overview ==
SudoRoom had a [http://typeamachines.com/ Type A Machine]. It was generously donated by Jae Kwon in fall 2012.  Now it's with [[user:yar|Yar]].
But an identical 3D printer was donated by [http://shadowfolds.com/ Chris K. Palmer] in 2021 and is on the same desk in the same place.


==Getting Started==
We no longer have a hack night dedicated to 3D Printing, but when we figure that out, stop by and learn, create, play!
===3D Models===
Any '''.stl''' file can be printed out by the printer. A good place to find '''.stl''' files is [http://thingiverse.com/].


If you haven't done 3D modeling before then give something easy a try like [http://tinkercad.com] (in Google Chrome) or Google sketchup (installed on computer adjacent to printer). Sketchup can now directly import '''.stl''' files thanks to [http://sketchuptips.blogspot.com/2010/03/sketchup-stl-importer-redo.html this plugin]. Also consider [http://blender.org Blender] (installed on computer adjacent to printer) for modeling, although it is primarily a software for animation it apparently is good for regular modeling as well.
See our [[Print_Gallery|gallery of creations]]!


===Using the printer===
==Status==
[[File:ExtruderWiring.jpg|thumb|Wiring configuration for Series 1 Typa 3d Printer; Orange to Green; Purple to Clear; Red/Black to Red/Black]]


To calibrate the bed, see instructions on the [[3DPrinting]] page.
The printer is currently working! (June 11th 2022)


''This is a transcription of the note in front of the printer:''
Notes about the bed:
* The acrylic bed has a plate of glass taped on top of it.
* The glass is flat, so you can print big things again.
* You still need to adjust the corner screws to keep things level. Make sure they are tight or they wiggle and fall off.
* The nozzle should be just a millimeter or so above the bed. '''Tip:''' wiggle a piece of paper under it - heavy friction means a little too close.
* We need more ScotchBlue #2093EL tape.


# Make sure the blue tape is flat and covers the glass base (formerly acrylic).
==Extruder Hot End==
# Prepare an '''.stl''' file (see [[O:5#3D Models]] above).
# Open the program '''Repetier''' (on the Desktop).
# Turn machine on (switch on back, right-hand-side).
# Connect by clicking at the top left "connect" ([http://en.wikipedia.org/wiki/Power_symbol power symbol]) in Repetier.
# Add objects to the field by selecting "Add Object" on the lower right-hand-side of Repetier.
# Select the Slic3r tab on the right-hand tabbed menu, then select "Slice with Slic3r".
# When slicing is done, hit "run" ([https://en.wikipedia.org/wiki/Play_symbol play symbol]).
# When your object(s) is(are) done printing, turn off the printer and put the computer to sleep (or standby).


=== Printer Calibration: Comics ===
Our extruder is has a 12v cartridge heater and .35mm nozzle. This is standard for extruding a 1.75mm PLA filament.


A comic book interpretation of the Printer Calibration instructions from Jae.
==Attached Computer==


[[File:3D Printing Instructions Page 1.jpg|400px|3D Printing - page 1]]
The printer can attach to any computer by USB, but usually it's attached to a Linux machine called [[wasp.local]].  Some of the following software is installed locally:
* [http://slic3r.org/ slic3r] (turns STL files into gcode)
* Ultimaker Cura
* kisslicer (alternative to slic3r)
* [https://github.com/kliment/Printrun pronterface] (operates the printer, which accepts gcode)


[[File:3D Printing Instructions Page 2.jpg|400px|3D Printing - page 2]]
If using Printrun/Pronerface/Pronsole the baudrate is 250000.


[[File:3D Printing Instructions Page 3.jpg|400px|3D Printing - page 3]]
== Musicality ==
 
One of the first things newcomers notice is the beautiful sound created by a 3D printer. I think it's especially nice when printing curved lines, when the X and Y axes sing in harmonic, contrapuntal motion. When printing perfect circles, it's as if the celestial spheres are whispering mathematical truths into your ears.
 
3D printers also play dubstep.
 
== External Links ==
 
[https://www.youtube.com/watch?v=rctPgALRUGU musical wiggly vase video]
 
Documentation:
* Outdated [[Print_Gallery#Illustrations|comic strip instructions]]
* [https://github.com/sudoroom/3DPrinting our own github documentation]
* [https://noisebridge.net/wiki/3DPrintBeginners Noisebridge's 3D-printing documentation]
* [http://typeamachines.com/ Manufacturer's website]
** [http://cdn.shopify.com/s/files/1/0223/2361/files/Series12013StandardUserManualV1_6.pdf?6262 User Manual]
** [http://support.typeamachines.com/hc/en-us Type A Machines Support Page] has lots of info on how to use and repair the printer.
** [http://support.typeamachines.com/hc/en-us/articles/200213410-Replacing-the-Blue-Tape-on-the-Build-Surface Replacing the blue tape build surface]
** [http://support.typeamachines.com/hc/en-us/articles/200022919-Cleaning-out-a-Filament-Jam Cleaning out a filament jam]
** [http://forum.typeamachines.com/index.php Online Forum]
* At least one Sudoer works for the manufacturer - his business card is tacked to the cork board above the printer.
 
[[Category:3DPrinting]]

Latest revision as of 23:20, 11 June 2022

Type-A-Machines-series-1-3d-printer.png
Spool Chaos.jpg

This is about a particular printer. There's a separate page about creating or acquiring 3D models.

Current Status

It's on the 3D printing desk and works perfectly!

Overview

SudoRoom had a Type A Machine. It was generously donated by Jae Kwon in fall 2012. Now it's with Yar. But an identical 3D printer was donated by Chris K. Palmer in 2021 and is on the same desk in the same place.

We no longer have a hack night dedicated to 3D Printing, but when we figure that out, stop by and learn, create, play!

See our gallery of creations!

Status

Wiring configuration for Series 1 Typa 3d Printer; Orange to Green; Purple to Clear; Red/Black to Red/Black

The printer is currently working! (June 11th 2022)

Notes about the bed:

  • The acrylic bed has a plate of glass taped on top of it.
  • The glass is flat, so you can print big things again.
  • You still need to adjust the corner screws to keep things level. Make sure they are tight or they wiggle and fall off.
  • The nozzle should be just a millimeter or so above the bed. Tip: wiggle a piece of paper under it - heavy friction means a little too close.
  • We need more ScotchBlue #2093EL tape.

Extruder Hot End

Our extruder is has a 12v cartridge heater and .35mm nozzle. This is standard for extruding a 1.75mm PLA filament.

Attached Computer

The printer can attach to any computer by USB, but usually it's attached to a Linux machine called wasp.local. Some of the following software is installed locally:

  • slic3r (turns STL files into gcode)
  • Ultimaker Cura
  • kisslicer (alternative to slic3r)
  • pronterface (operates the printer, which accepts gcode)

If using Printrun/Pronerface/Pronsole the baudrate is 250000.

Musicality

One of the first things newcomers notice is the beautiful sound created by a 3D printer. I think it's especially nice when printing curved lines, when the X and Y axes sing in harmonic, contrapuntal motion. When printing perfect circles, it's as if the celestial spheres are whispering mathematical truths into your ears.

3D printers also play dubstep.

External Links

musical wiggly vase video

Documentation: