Difference between revisions of "Type A Machine"

From Sudo Room
Jump to navigation Jump to search
(move gallery to separate page)
(new top image)
Line 1: Line 1:
[[File:Spool Chaos.jpg|right|frameless|400px]]
''This is about a particular printer. There's a separate page about [[3D_Modeling|creating or acquiring 3D models]].''
''This is about a particular printer. There's a separate page about [[3D_Modeling|creating or acquiring 3D models]].''

Revision as of 15:40, 14 March 2014

Spool Chaos.jpg

This is about a particular printer. There's a separate page about creating or acquiring 3D models.

SudoRoom has a Type A Machine, currently our only 3D printer. It was generously donated by Jae Kwon in fall 2012.

Tuesdays 5-9 is our hack night dedicated to 3D Printing. Stop by and learn, create, play!

See our gallery of creations!

We're working on using this machine to print a RepRap.


The printer is currently working! (March 4th, 2014)

Notes about the bed:

  • Our acrylic bed was warped by sunlight, so we clamped a glass bed on top of it.
  • The glass is flat, so you can print big things again.
  • You still need to adjust the corner screws to keep things level. Make sure they are tight or they wiggle and fall off.
  • The nozzle should be just a millimeter or so above the bed. Tip: wiggle a piece of paper under it - heavy friction means a little too close.
  • We need more ScotchBlue #2093EL tape.
Wiring configuration for Series 1 Typa 3d Printer; Orange to Green; Purple to Clear; Red/Black to Red/Black

Extruder Hot End

Our extruder is has a 12v cartridge heater and .35mm nozzle. This is standard for extruding a 1.75mm PLA filament. Type A is routinely out of stock, but replacement kits can be found here: http://www.makergear.com/products/extruders

Attached Computer

The printer can attach to any computer by USB, but usually it's attached to a Linux machine called "sudodesk." It runs Linux Mint which does not have much helpful software in its repos, so the desktop user "sudoer" has these installed locally:

  • slic3r (turns STL files into gcode)
  • kisslicer (alternative to slic3r)
  • pronterface (operates the printer, which accepts gcode)

We can also give you your own user! Contact yar or jerkey.


One of the first things newcomers notice is the beautiful sound created by a 3D printer. I think it's especially nice when printing curved lines, when the X and Y axes sing in harmonic, contrapuntal motion. When printing perfect circles, it's as if the celestial spheres are whispering mathematical truths into your ears.

External Links

musical wiggly vase video