[Mesh] updated walkthrough

Wed Nov 20 11:38:31 PST 2019

Hey Matt, it sounds like a good idea. Sunday, I am not sure if I am
available, yet. But, we can meet Saturday for sure, if  that works for you.

Let me know,

Daniel

On Wed, Nov 20, 2019 at 9:11 AM Matt Senate <mattsenate at gmail.com> wrote:

> All,
>
> Glad everyone is excited and we are making a lot of improvements!
>
> Is this diagram accurate?
> https://sudoroom.org/wiki/File:Nodeports_titles.png
> If so, should we provide stickers on the routers to label the ports?
> Also does the dynamic diagram in the admin interface indicate if someone
> used the wrong port?
>
> Daniel,
>
> I'm happy to help put the photos in and add your edit to the wikis. Do you
> want to meet up? I am planning to flash another node and an extender node
> (or two) this week as well. Then I'll update the Extender Node walk through
> https://sudoroom.org/wiki/Mesh/Flashing_extender_nodes
>
> I was thinking Sunday when folks normally meet up to do mesh stuff, but
> possibly other days before then too.
>
> - Matt
>
> On Tue, Nov 19, 2019 at 11:09 PM danarauz at gmail.com <danarauz at gmail.com>
> wrote:
>
>> Super!! Happy that you like the photos Benny!
>>
>> Daniel
>>
>>
>>
>> On Tuesday, November 19, 2019, Benny Benny <bennlich at gmail.com> wrote:
>>
>>> Wow those are great photos, Daniel. I haven't gotten around to adding
>>> them yet, but I did try to make the configuration section a little clearer.
>>>
>>> On Nov 16 2019, at 3:59 am, danarauz at gmail.com wrote:
>>>
>>> I flashed a new router tonight, and here is my so so report.
>>>
>>> 1. Uploading not working on Ubuntu Spanish version, I used Firefox.
>>> After five or six resets and not being able to upload the firmware, I
>>> switched to a MacOS machine.
>>> It just came to mind that, perhaps, Firefox in the Ubuntu machine,
>>> needed JavaScript enabled.
>>>
>>> 2. Using Brave browser, on MacOS Mojave 10.14.6, the upload and
>>> countdown worked on the first try, and the rest of the process went fine.
>>>
>>> 3. It produces a bit of wonder when connected to the PON SSID was just
>>> out, and not connecting to the Internet yet.
>>> I didn't know how long would the auto-configuration would take. Even now
>>> I am not sure how long it took. 15mins? 10?
>>>
>>> 4. About the paragraph that says:
>>> “Note: If you installed release 0.3.0
>>> <https://github.com/sudomesh/sudowrt-firmware/releases/tag/0.3.0> for
>>> myNet N600 routers, your node can be autoconfigured. You will not need to
>>> use the previous solution makenode, otherwise you may need to read the (instructions
>>> further down
>>> <https://sudoroom.org/wiki/Mesh/WalkThrough#Makenode_.28v.0.2.3_and_earlier.29>
>>> *)”* Can that all be removed or modified with something shorter or like
>>> this?: Note: If you did NOT install release 0.3.0
>>> <https://github.com/sudomesh/sudowrt-firmware/releases/tag/0.3.0> for
>>> myNet N600 routers, please skip this section and go to step: “Blah Blah”.
>>>
>>> 5. An observation:. When connected the node, via ssh, I found the "
>>> config_succeeded" file with instructions on how to update passwords,
>>> and says to delete the line that reads "* */12 * * * /opt/mesh/pw_reset"
>>> But, when checking cron, the only line there says: "0 * * * *
>>> /opt/mesh/pwd_reset"
>>>
>>> 6. I am not modifying anything on the wiki, but i am providing some
>>> photos taken tonight during the flashing of the router. Feel free to use
>>> them if you want. Location:
>>> https://danielarauz.com/peoples-open-network/
>>>
>>> Thanks!
>>>
>>> D
>>>
>>>
>>> On Thu, Nov 14, 2019 at 10:08 PM Matt Senate <mattsenate at gmail.com>
>>> wrote:
>>>
>>> Glad folks are finding it useful! I'll probably be running another
>>> install soon, so I'll see if anything comes up. Please add notes too!
>>>
>>> As for the video, I think the fastest solution is to upload a screenshot
>>> as a thumbnail and link it to the full video on the peoples open website.
>>>
>>> Otherwise, yeah I believe you have to install an extension for either
>>> YouTube, embedded video, or embedded iframes.
>>>
>>> On Thursday, November 14, 2019, Jenny Ryan <jenny at jennyryan.net> wrote:
>>> > This is awesome, thank you Matt!!! (and hi D <3)
>>> >
>>> > Robb and I worked on a walkthrough video last year, which we should
>>> probably link to (can we embed youtube videos on mediawiki pages?) - It's
>>> on this page and I'll put it in this thread for reference to add when I
>>> have more time (unless someone beats me to it ;):
>>> https://peoplesopen.net/learn/
>>> >
>>> > On Thu, Nov 14, 2019 at 8:48 PM danarauz at gmail.com <danarauz at gmail.com>
>>> wrote:
>>> >>
>>> >> Yay!  I will be using that updated version of the walkthrough, pretty
>>> soon (I am waiting for a router I ordered recently).
>>> >>
>>> >> Thanks Matt!
>>> >> On Thu, Nov 14, 2019 at 6:14 PM Marc Juul <marc at juul.io> wrote:
>>> >>>
>>> >>> Looks great, thanks for updating it!
>>> >>>
>>> >>> On 11/14/19, Matt Senate <mattsenate at gmail.com> wrote:
>>> >>> > hey all,
>>> >>> >
>>> >>> > I recently flashed a node, so I updated the walkthrough to
>>> hopefully be
>>> >>> > easier for others to follow, please review!
>>> >>> >
>>> >>> > https://sudoroom.org/wiki/Mesh/WalkThrough
>>> >>> >
>>> >>> > - Matt
>>> >>> >
>>> >>> _______________________________________________
>>> >>> mesh mailing list
>>> >>> mesh at lists.sudoroom.org
>>> >>> https://sudoroom.org/lists/listinfo/mesh
>>> >>
>>> >> _______________________________________________
>>> >> mesh mailing list
>>> >> mesh at lists.sudoroom.org
>>> >> https://sudoroom.org/lists/listinfo/mesh
>>> >
>>>
>>> _______________________________________________
>>> mesh mailing list
>>> mesh at lists.sudoroom.org
>>> https://sudoroom.org/lists/listinfo/mesh
>>>
>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sudoroom.org/pipermail/mesh/attachments/20191120/d7a132b7/attachment.html>