[Mesh] updated walkthrough

[danarauz at gmail.com]

Last night I didn't have time to work on it. But, I unplugged the router a
few times, while re-arranging the wire, and now that I am checking
connectivity I see that is working. huh! :)


On Thu, Nov 21, 2019 at 8:09 AM Matt Senate <mattsenate at gmail.com> wrote:

> I had to log in to the router and check `ip addr` to see if the config
> server had correctly set IPs -- there had been an issue with the server at
> the time.
>
> On Thu, Nov 21, 2019 at 2:04 AM danarauz at gmail.com <danarauz at gmail.com>
> wrote:
>
>>
>> “Huston we got a problem!”
>>
>> The two PON Networks are broadcasting, from the newly flashed router, but
>> without Internet connectivity.
>>
>> I can not tell if this issue is new or if these two networks had not
>> worked since the day I flashed the router. I had the router unplugged for a
>> day or so, while in transition to its new physical location.
>>
>> “babeld -i“  is showing several other nodes in the mesh.
>>
>> Any suggestions?
>>
>> Thanks,
>>
>> D
>>
>>
>>
>> On Thu, Nov 21, 2019 at 2:26 AM Jenny Ryan <jenny at jennyryan.net> wrote:
>>
>>> On Wed, Nov 20, 2019 at 9:11 AM Matt Senate <mattsenate at gmail.com>
>>> wrote:
>>>
>>>> All,
>>>>
>>>> Glad everyone is excited and we are making a lot of improvements!
>>>>
>>>> Is this diagram accurate?
>>>> https://sudoroom.org/wiki/File:Nodeports_titles.png
>>>>
>>>
>>> It is accurate!
>>>
>>> If so, should we provide stickers on the routers to label the ports?
>>>>
>>>
>>> The sticker design I made! It lives in our propaganda repo, which I'm
>>> sure you'll love, Matt :)
>>> https://github.com/sudomesh/propaganda/tree/master/stickers/router_ports
>>> I believe Seth deployed the last printed sticker last night for a node
>>> to be deployed at PLACE! So, action item is to print more (there's sticker
>>> paper in the Omni Office)
>>>
>>>
>>>> Also does the dynamic diagram in the admin interface indicate if
>>>> someone used the wrong port?
>>>>
>>>
>>> I don't believe so - that'd be a nice feature request for
>>> sudowrt-firmware <https://github.com/sudomesh/sudowrt-firmware>! (iirc,
>>> the admin dashboard is bundled in that repo, and benny @bennlich would know
>>> best)
>>>
>>> Daniel
>>>>
>>>> I'm happy to help put the photos in and add your edit to the wikis. Do
>>>> you want to meet up? I am planning to flash another node and an extender
>>>> node (or two) this week as well. Then I'll update the Extender Node walk
>>>> through https://sudoroom.org/wiki/Mesh/Flashing_extender_nodes
>>>>
>>>> I was thinking Sunday when folks normally meet up to do mesh stuff, but
>>>> possibly other days before then too.
>>>>
>>>
>>> Would you be down to help us reboot Sunday BYOI Office Hours (2-5pm)?
>>> You don't have to commit longitudinally, but would be a nice thing to start
>>> up again.
>>> Not sure I can make it this weekend, as it's fairly busy, but will be
>>> around Omni on Saturday from 5pm on for assist on an evening event (and
>>> training on the Meyers!)
>>>
>>> <3
>>> Jenny
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sudoroom.org/pipermail/mesh/attachments/20191122/6900b093/attachment.html>