[sudo-announce] This Sat. 6/29 Today I Learned: How to showcase your 3D printed work with a time-lapse video

[Steve Berl]

If anyone does not have a Canon that can run magic lantern, but still wants
to do similar, I have used an arduino and an IR LED to trigger the shutter
at regular intervals on my Nikon.

I can probably dig out the simple sketch if anyone is interested.

On Thursday, June 27, 2013, Marina Kukso wrote:

> Hello!
>
> Please join us at Sudo Room (2141 Broadway, entrance on 22nd St., take the
> elevator upstairs) this Saturday 6/29 at 2PM for "Today I Learned": How to
> showcase your 3D printed work with a time-lapse video.
>
> Here's some more info about this free workshop:
>
> We will be doing a video, time-lapse of a 3D print from two angles. This
> will involve 2 cameras, using magic latern on at least one camera. In the
> class we will learn how to:
>
>    - Set up lighting for optimal video
>    - Set up multiple Cameras to shoot 3D prints
>    - Use magic lantern for a Canon 550d, 5d Mark ii, or similar camera to
>    do a time-lapse of the process
>    - Record a post and pre-print video about the project
>
> *
> *
>
> *his workshop is part of the series “Today I Learned,” a series of free
> workshops that take place every Saturday at 2PM at Sudo Room, a creative
> community and hackerspace in downtown Oakland. Check out the full schedule
> at http://sudoroom.org/wiki/Today_I_Learned and please forward widely.*
>
>

-- 
-steve
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sudoroom.org/pipermail/sudo-announce/attachments/20130627/9218db3e/attachment.html>