[sudo-discuss] kijanigrows microserver in sudoroom

[Jake]

ok i figured out the 1wire temperature sensor thing and i plugged it into pin
26 where it's supposed to go, and then i plugged it in, and then i reset the
arduino side of the board, and now it seems to be working according to
tail -f /tmp/serial.txt

but the graph on the webpage is not updating.  do i have to reboot the whole
thing?

http://api.kijanigrows.com:3000/dashboard/db/sudoroom?from=now-5m&to=now

On Wed, 30 Nov 2016, emaundu wrote:

> connectin 1-wire sensors
>
> http://kijanigrows.com/kb/using-1-wire-temperature-sensors-with-the-v2-controller/
>
> it's a one wire ... vcc, gnd, and D6 ... see tutorial above
>
>
> you configure wifi using ethernet .. just like you would your wifi router at 
> home.
>
> it is configured as a wifi client
>
>
> connecting using wifi ip
>
> once you connect to wifi .. you don't need the cable you can connect to the 
> device using its wifi ip  ... as found on json
>
> ssh root at 192.168.195.176  (or 192.168.73.1 using ethernet)
>
> http://192.168.195.176
>
>
> connecting to wifi
>
> http://kijanigrows.com/kb/v2_board-how-to-connect-to-a-new-wifi-network/
>
>
> arduino and other files
>
> http://kijanigrows.com/support/download-libraries/
>
>
> On 11/30/2016 11:48 PM, Jake wrote:
>> can you tell me what pin the temperature sensor is supposed to connect?  It 
>> got
>> pulled out at some point and was sitting in some random analog pins.  the 
>> wires
>> are in the order RED, BLACK, YELLOW
>> 
>> wow we figured it out, it's very confusing though.  the ethernet port is
>> serving DHCP out, but it's using its internal wifi antenna to get on the
>> "sudoroom" wifi.
>> 
>> our subnet is 100.*.*.* but I saw the IP address in the json linked from 
>> your
>> URL below.
>> 
>> does it contain a program to upload to its internal arduino? where's the
>> program that's in the arduino now?
>> 
>> thank you for this cool thing.  we want to get it working to log the
>> temperature in sudoroom, and maybe even to control a heater!
>> 
>> -jake
>> 
>> On Wed, 30 Nov 2016, emaundu wrote:
>> 
>>> it is active ...
>>> 
>>> http://api.kijanigrows.com/app
>>> 
>>> and here
>>> 
>>> http://api.kijanigrows.com/v2/devices/list
>>> 
>>> and here
>>> 
>>> http://api.kijanigrows.com/v2/maps/list
>>> 
>>> 
>>> 
>>> On 11/30/2016 10:23 PM, Jake wrote:
>>>> hi Eric,
>>>> 
>>>> we have the controller powered up and plugged into internet, but it does 
>>>> not
>>>> seem to be updating the page here:
>>>> http://api.kijanigrows.com:3000/dashboard/db/sudoroom
>>>> 
>>>> or here
>>>> 
>>>> http://api.kijanigrows.com/app/#/device_sensors/sudoroom/
>>>> 
>>>> it definitely is plugged into ethernet and has a link and it is powered 
>>>> on.
>>>> 
>>>> can we check on it somehow?  how does it work?
>>>> 
>>>> it's on the sudoroom hacking table right now, plugged in.  i'm not sure 
>>>> if the
>>>> sensors are connected right or not.
>>>> 
>>>> thank you!
>>>> -jake
>>>> 
>>>> On Wed, 30 Nov 2016, robb wrote:
>>>> 
>>>>> ---------- Forwarded message ----------
>>>>> From: emaundu <emaundu at kijanigrows.com>
>>>>> Date: Thu, Jun 23, 2016 at 4:15 AM
>>>>> Subject: Re: salaams
>>>>> To: robb <sf99er at gmail.com>
>>>>> 
>>>>> 
>>>>> hey robb.
>>>>> hope well.
>>>>> please could you reset the controller for me ....  i think when i left 
>>>>> it
>>>>> was not work ..
>>>>> please could you reset the power switch (big white button on bottom)... 
>>>>> if
>>>>> it works it should show data when you select say a last 15min data 
>>>>> setting
>>>>> in the graphs below
>>>>> the power switch maybe sticky/stiff due to the new cardboard i swapped 
>>>>> just
>>>>> before i left. remove it from the wall where i taped it if need be to
>>>>> ensure the button depresses off then on.
>>>>> http://api.kijanigrows.com/app#/trends/sudoroom
>>>>> or by seeing it's uptime update in this listing
>>>>> http://api.kijanigrows.com/v2/devices/list
>>>>> 
>>>>> thanks so very much in advance .. i planned on dropping by 
>>>>> yesterday/today
>>>>> but did not get a chance ...
>>>>> soon,
>>>>> -m.
>>>>> 
>>>>> 
>>>>> 
>>>>> On 06/16/2016 07:01 AM, robb wrote:
>>>>> 
>>>>> motion sensor lights would be nice
>>>>> 
>>>>> On Thu, Jun 16, 2016 at 4:51 AM, emaundu <emaundu at kijanigrows.com> 
>>>>> wrote:
>>>>> 
>>>>>> hey bobby (hope i got that correct - ehh short term memory loss)
>>>>>> hope well.
>>>>>> nice meeting you earlier on ...
>>>>>> what other data points do you think would be nice to collect and 
>>>>>> visualize
>>>>>> in the sudoroom.
>>>>>> thanks,
>>>>>> -maundu
>>>>>> 
>>>>>> 
>>>>> 
>>> 
>